Grinding gears while downshifting
#1
Full Member
Thread Starter
Join Date: Sep 2002
Location: Hawaii
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Grinding gears while downshifting
when im driving my 2nd and 3rd gear almost always grind while im downshifting but never while im upshifting. when i downshift i usually rev to match the rpms. is this a synchro prob of do you think if i just put in the synth trans fluid itll be enough.
#5
I wish I was driving!
Originally posted by powerlover
you could just try not downshifting. brakes are alot cheaper than a motor, tranny, or clutch.
you could just try not downshifting. brakes are alot cheaper than a motor, tranny, or clutch.
Tell me how to accelerate on the freeway by using the brakes....
I downshift from fifth to third. For some reason, braking never crossed my mind.
#7
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Just curious-It won't grind if you downshift at a lower rpm, correct?
If this is the case, you can try synthetic, but the syncros are probably shot. Just replaced all syncros in my '89TII, would only grind if downshifting at higher than normal RPM's. Half the groves on the syncros were worn off.
If this is the case, you can try synthetic, but the syncros are probably shot. Just replaced all syncros in my '89TII, would only grind if downshifting at higher than normal RPM's. Half the groves on the syncros were worn off.
Thread
Thread Starter
Forum
Replies
Last Post
MILOS7
3rd Generation Specific (1993-2002)
2
10-09-15 02:19 AM