Getting hitched?
#1
Just Messing About
Thread Starter
Join Date: Feb 2001
Location: Just West of Atlanta
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
Getting hitched?
Anobody know where I might get my hands on a used hitch for my FC?
I'm looking at a tire trailer but I can't afford a new hitch and the trailer at one time and it seems a little pathetic to have another trailer (I'm storing somebody elses trailer) in my yard with no means to pull them....
Thanks,
Cory
I'm looking at a tire trailer but I can't afford a new hitch and the trailer at one time and it seems a little pathetic to have another trailer (I'm storing somebody elses trailer) in my yard with no means to pull them....
Thanks,
Cory
#4
~~~~~~~~~~~~~~~~~~~~~~~
Join Date: May 2001
Location: Pittsburgh, PA
Posts: 1,594
Likes: 0
Received 0 Likes
on
0 Posts
this is all I could find. It might be worth buying a new one if you plan on towing for a while.
http://www.jcwhitney.com/catsubpic.jhtml?CATID=3315&BQ=
sorry; I don't think any of those work on 7s. They do have them for other mazdas though.
http://www.jcwhitney.com/catsubpic.jhtml?CATID=3315&BQ=
sorry; I don't think any of those work on 7s. They do have them for other mazdas though.
Last edited by Samps; 04-26-02 at 10:30 AM.
#5
~~~~~~~~~~~~~~~~~~~~~~~
Join Date: May 2001
Location: Pittsburgh, PA
Posts: 1,594
Likes: 0
Received 0 Likes
on
0 Posts
this may help. i think it is about a 3rd gen though.
http://www.scuderiaciriani.com/rx7/t...h_install.html
http://www.scuderiaciriani.com/rx7/t...h_install.html
Trending Topics
#8
Haven't we ALL heard this
Well, I wanted the same thing. I wanted it for a tire trailer and a bike hitch. I went to a local welding shop. They had a hitch off of a SUV. Then they cut it to fit my car. They then welded it to the tow hitchs.
Cost me $100. When I searched and called and looked every where. Nobody made a bolt up trailer hitch that could be a reciever. They all had a ball on it that could not come off. That is the last thing I wanted. A damn ball. Check out my website for pictures.
http://pws.gamewood.net/~mb800/trailer.html
Cost me $100. When I searched and called and looked every where. Nobody made a bolt up trailer hitch that could be a reciever. They all had a ball on it that could not come off. That is the last thing I wanted. A damn ball. Check out my website for pictures.
http://pws.gamewood.net/~mb800/trailer.html
#9
Senior Member
Join Date: Mar 2002
Location: bel air maryland
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
when I bougt my fc, there was a hitch already attached, and it looked almost factory. I spent 2 days tring to get it off with the impact wrench, too bad i threw it away...
#10
Just Messing About
Thread Starter
Join Date: Feb 2001
Location: Just West of Atlanta
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by airbrush1
when I bougt my fc, there was a hitch already attached, and it looked almost factory. I spent 2 days tring to get it off with the impact wrench, too bad i threw it away...
when I bougt my fc, there was a hitch already attached, and it looked almost factory. I spent 2 days tring to get it off with the impact wrench, too bad i threw it away...
Cory
#11
Senior Member
Join Date: Nov 2001
Location: Home: Maine / College: Greensboro NC
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
I have one, uh one that I took off. It isn't in the best of condition (little rust where it sat near the muffs)...but besides that it works fine. I don't or more or likely don't know where the hardware is if you need it. If you desperatly need it than I can probably find it for you....PM me sometime and I guess we can see what happens
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
rotarypower101
3rd Generation Specific (1993-2002)
5
08-22-05 10:54 AM
1987RX7guy
2nd Generation Specific (1986-1992)
4
08-04-04 07:28 PM