2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

The frigging antennae is stuck !!!

Thread Tools
 
Search this Thread
 
Old Jan 22, 2002 | 09:02 AM
  #1  
The Ace's Avatar
Thread Starter
Greek Power
Tenured Member: 20 Years
 
Joined: Aug 2001
Posts: 2,375
Likes: 0
From: Greece
The frigging antennae is stuck !!!

Although my TII is running almost perfectly, I have a couple of problems:
1) the passenger lock does not unlock with the remote. It still works fine, but it does not open automatically when I unlock the car
2) the usual wiper relay
3) the power antennae is stuck (as it seems). Does not go up OR down...I know I must "undress" the trunk and dig in, but anyone have any ideas ?
Reply
Old Jan 22, 2002 | 09:53 AM
  #2  
AreExSeven's Avatar
Huh?
Tenured Member 10 Years
 
Joined: Nov 2001
Posts: 1,087
Likes: 0
From: Lost
I got the same problem. In fact, I never had an antenea that worked, so I'm unfamiliar with how it even works. is it supposed to go up when the car turns on? or when the radio turns on? or do I have to press a button?
Reply
Old Jan 22, 2002 | 02:50 PM
  #3  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
If the antenna motor is running when you turn on the stereo, then you just have a broken mast. Mazdatrix and the dealer have replacement masts for about $35 to $40. It is not a simple thing to replace, the majority of the ime the power antenna will need to be disassembled, but if you are the type to do all your work its not bad.
Reply
Old Jan 22, 2002 | 03:28 PM
  #4  
jeff_oner's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 120
Likes: 0
From: portland
i dont ever listen to the radio and my antenna was stuck up, so i just pushed down on it until it went down on its own and clicked about 15 times and voila no antenna sticking up (looks a lot better)
Reply
Old Jan 22, 2002 | 03:45 PM
  #5  
dcamcoTII's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Jul 2001
Posts: 555
Likes: 0
From: Houston, TX
I bought the mast and soon after the motor died on me. i found a cheap an easy alternative rubber one at radioshack, it was like 5 bucks, oooks nice, works well and will never break.
Reply
Old Jan 22, 2002 | 03:46 PM
  #6  
Evil Aviator's Avatar
Rotorhead
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,136
Likes: 39
From: Charlottesville, Virginia, USA
http://www.mazdatrix.com/faq/86-92ant.htm
Reply
Old Jan 22, 2002 | 04:01 PM
  #7  
Six Rotors's Avatar
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (17)
 
Joined: Feb 2001
Posts: 878
Likes: 0
From: Pluto
If the motor is not running when you turn on the radio,and assuming your wiring is intact then usually it is the relay or antenna motor which has failed.(In my experience it has always been the relay).These are expensive from Mazda.So I have been stripping power antennae out of cars at the wreckers yard.You can get them really cheap particularly if the antenna rod is broken.About 50% time the relays have been good.
Reply
Old Jan 23, 2002 | 01:14 AM
  #8  
The Ace's Avatar
Thread Starter
Greek Power
Tenured Member: 20 Years
 
Joined: Aug 2001
Posts: 2,375
Likes: 0
From: Greece
Thumbs down

Yeah the motor is running, I can hear it clicking (because it is opposed by whatever is stopping the antennae going up), but the antennae itself doesnt go anywhere....

Probably will have to take off wing and motor to check it out....
Reply
Old Jan 23, 2002 | 01:36 PM
  #9  
AreExSeven's Avatar
Huh?
Tenured Member 10 Years
 
Joined: Nov 2001
Posts: 1,087
Likes: 0
From: Lost
Originally posted by Six Rotors
If the motor is not running when you turn on the radio,and assuming your wiring is intact then usually it is the relay or antenna motor which has failed.(In my experience it has always been the relay).These are expensive from Mazda.So I have been stripping power antennae out of cars at the wreckers yard.You can get them really cheap particularly if the antenna rod is broken.About 50% time the relays have been good.
Thats what happening to mine. I turn on the rario and don't even get a sound.
How do I find out if all the wiring is intact? Just look at it? or do I need to do a test on it somehow. Also, what is the relay? Is it on the antenna? Cause I need to know what I need to rip out when I go to the junkyard this weekend.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rx7inoregon
Old School and Other Rotary
5
Oct 1, 2015 12:44 PM
subeone
General Rotary Tech Support
0
Sep 24, 2015 09:58 PM




All times are GMT -5. The time now is 09:04 AM.