Flushing oil cooler
#1
Rotary Freak
Thread Starter
Join Date: Mar 2001
Location: LA.,California USA
Posts: 1,611
Likes: 0
Received 0 Likes
on
0 Posts
Flushing oil cooler
My 7 sat for almost 3 years and so did the oil cooler that
had a mean oil line leak. I would like to gunk off the stuck oil and dirt on the fins and as well inside the cooler. Is there a way to do my own cooler flush??..I went to a radiator shop that distributes KOYO rads and they told me to fill the core with some kind of degreaser ( i was told CHEM DIP). Its the same stuff i used to clean my housings when i rebuilt my engine. It worked pretty good but i would like to know if any of you recommend doing this. I know there is a thermostat inside but how do i keep it OPEN to get degreaser all inside the cooler. Thanx in advance!
had a mean oil line leak. I would like to gunk off the stuck oil and dirt on the fins and as well inside the cooler. Is there a way to do my own cooler flush??..I went to a radiator shop that distributes KOYO rads and they told me to fill the core with some kind of degreaser ( i was told CHEM DIP). Its the same stuff i used to clean my housings when i rebuilt my engine. It worked pretty good but i would like to know if any of you recommend doing this. I know there is a thermostat inside but how do i keep it OPEN to get degreaser all inside the cooler. Thanx in advance!
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM