mr_vaughn

iTrader: (1)

My engine wire harness is getting old and brittle.
when i move some wires aroung or even disconnect some connectors some plactic breaks off and the wires are about to break off the connectors
I have had a wire break already on my BAC and another location.

How difficult is it to remove the old 1 and install the new?
Where do i fine 1 for a 89 Turbo2?
What is the part number for it?

Wankel7

Man, I had a dealer price one and it was about $1000. Not many people buying full harness I suppose.

Just patch the breaks man. Go to a junk yard and see if you can cut the connectors off you need that have good wiring. Then solder to your harness.

Some times they are on ebay.

James

AreExSeven

Sounds like something you could make a business out of. It seems like alot of people, including myself, need replacements.

Spawn VII

i wonder where you can find those connectors... i wanted to make one if my *** is not lazy enough heheh... maybe even reroute it so it's not right on top of the engine...

mr_vaughn

iTrader: (1)

good idea about rerouting away from the engine

vmb

good luck in rerouting the eng harness !

have you seen how many wires it has
if you try to tackle this problem by rerouting it good luck

10TH_ANNIV_T2

Your could try Mazdatrix, I bought the engine harness last fall for about $550. Yes, it was real, and it's spectacular.....

Greg O.

FPrep2ndGenRX7

For a few hundred more than $1000 you could get a stand alone ECU with a new wiring harness.