Engine troubles
#1
Rotor Head
Thread Starter
Join Date: Jan 2002
Location: British Columbia
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Engine troubles
this one kind of sounds like a 3800 hesitation problem. But all threw the power band sometimes i feel a jerk jerk, I have no clue what it could be. Then it wants to stall sometimes, just once so far. it feels like i left off the pedal really quikly and then brake.....jerk jerk, can be when downshifting, or up shifting....just like 1st gear 5000 rpm, to 2nd gear to just under 2500 and it will Jerk jerk, just for a second. Please shed some light
thanks, happy thanksgivin to all you canadians!
Evan
thanks, happy thanksgivin to all you canadians!
Evan
#3
Refined Valley Dude
Join Date: Oct 2001
Location: Kitchener, Ontario (Hamilton's armpit)
Posts: 2,283
Likes: 0
Received 2 Likes
on
2 Posts
When was the last time you replaced your fuel filter?
My 7 started hesitating occasionally around the start of the month when I jumped on the gas. That crap ended with a new fuel filter.
Yeah, this isn't quite what you're describing, but each of our girls has her own idiosyncrasies.
My 7 started hesitating occasionally around the start of the month when I jumped on the gas. That crap ended with a new fuel filter.
Yeah, this isn't quite what you're describing, but each of our girls has her own idiosyncrasies.
#4
Rotor Head
Thread Starter
Join Date: Jan 2002
Location: British Columbia
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, i love her. I will do some maintence this week, fuel filter, plugs wires stuff like that. It drops revs for like 3/4 of a sec then comes alive like nothin happened. Thanks for replies
evan
evan
#7
Banned. I got OWNED!!!
probably TPS a bit out of adjustment (even if the light reveals otherwise, some cars may require fine adjustment) or one with a bad spot int he low range. Could also be old plugs.
Trending Topics
#8
Sorry for the delay, I just had a very similar problem and wanted to make sure that it fixed the problem before I started advising
I put in some Wynns spit fire injector cleaner and about halfway through a full tank the problem stopped and has not come back again.
I put in some Wynns spit fire injector cleaner and about halfway through a full tank the problem stopped and has not come back again.
#9
Rotor Head
Thread Starter
Join Date: Jan 2002
Location: British Columbia
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
I've got some of that.well it's STP But i will try that when i put in a full tank of gas and change the oil...I will do that tomorrow. Thanks everyone.
How does one adjust the TPS??
How does one adjust the TPS??
#11
Rotor Head
Thread Starter
Join Date: Jan 2002
Location: British Columbia
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
no, i havent checked it yet. I can't find my multimeter. And the bucking has gone away.....but it comes back. And blowtus, the thread got kicked back to the top. I'm just tying to get info. DOnt get mad, it's not your problem.
Thread
Thread Starter
Forum
Replies
Last Post