Engine Removal Write-up
I have a question for you. I have two 2nd generation RX7's. One is an '88, the other a '91. The '88 is manual, the '91 automatic. I want to switch the engine of the automatic '91 into the manual '88. Do you think this is possible, from what i've researched i think i just need to have the ECU from the '88 programmed for the engine of the '91. Am I all wrong? Thanks.
Brock
beefcakebrock@byu.edu
Brock
beefcakebrock@byu.edu
Wankel Traitor
Joined: May 2002
Posts: 256
Likes: 0
From: Lawrence, KS
Hey, you need a 91 ECU from a manual, and it should work fine. you have to pull the auto tranny stuff, bolt on a flywheel, throw a clutch on there, and you are ready to go.
The wiring harnesses are a bit different between the two cars, so that may present a problem.
Sean, may I have a copy of the TII writeup? Thanks!
jameson@huckaba.com
Jameson
The wiring harnesses are a bit different between the two cars, so that may present a problem.
Sean, may I have a copy of the TII writeup? Thanks!
jameson@huckaba.com
Jameson
1JZ powered
Joined: Jul 2001
Posts: 4,423
Likes: 0
From: Where there's only two seasons, hot and wet! I love Okinawa
Originally posted by Supermac 7
Hey, you need a 91 ECU from a manual, and it should work fine. you have to pull the auto tranny stuff, bolt on a flywheel, throw a clutch on there, and you are ready to go.
The wiring harnesses are a bit different between the two cars, so that may present a problem.
Sean, may I have a copy of the TII writeup? Thanks!
jameson@huckaba.com
Jameson
Hey, you need a 91 ECU from a manual, and it should work fine. you have to pull the auto tranny stuff, bolt on a flywheel, throw a clutch on there, and you are ready to go.
The wiring harnesses are a bit different between the two cars, so that may present a problem.
Sean, may I have a copy of the TII writeup? Thanks!
jameson@huckaba.com
Jameson
TII write up
I would greatly appreciate the TII write up!
kmp211@psu.edu
or you could send me it in a private message, thanks
kevino
kmp211@psu.edu
or you could send me it in a private message, thanks
kevino
Thread Starter
I wish I was driving!
Joined: Dec 2001
Posts: 5,241
Likes: 84
From: BC, Canada
I'm sending out a bunch today, home from work on rest. If you want one, now is your last chance for about two months, as I leave in a couple days for work again.
Sean Cathcart
Sean Cathcart
Thread Starter
I wish I was driving!
Joined: Dec 2001
Posts: 5,241
Likes: 84
From: BC, Canada
Originally posted by [bnd]
Sean,
If you want, I can swing by sometime whenever you get back and film you in action. I've got a Sony miniDV cam. I'd just need to pick up a few extra DV tapes.
Sean,
If you want, I can swing by sometime whenever you get back and film you in action. I've got a Sony miniDV cam. I'd just need to pick up a few extra DV tapes.
You can definitely swing by sometime though, check out how the project is going, maybe take a look at the products I have in development... Maybe test out a few parts for me? (My car won't be running...)
Sean Cathcart
Originally posted by scathcart
Thanks a lot for the offer. Actually, I will be buying a digital camera when I return, so it probably won't be necessary. Besides, I have an AIW Radeon 8500 in my PC...
You can definitely swing by sometime though, check out how the project is going, maybe take a look at the products I have in development... Maybe test out a few parts for me? (My car won't be running...)
Sean Cathcart
Thanks a lot for the offer. Actually, I will be buying a digital camera when I return, so it probably won't be necessary. Besides, I have an AIW Radeon 8500 in my PC...
You can definitely swing by sometime though, check out how the project is going, maybe take a look at the products I have in development... Maybe test out a few parts for me? (My car won't be running...)
Sean Cathcart
Also I have a firewire card in my comp, so if you ever need a hand capturing the vids, let me know. Definately drop me a message when you get back, I wouldn't mind apprenticing with a rotary master for a few hours
Thread Starter
I wish I was driving!
Joined: Dec 2001
Posts: 5,241
Likes: 84
From: BC, Canada
Originally posted by [bnd]
No prob. You can always use a second camera to capture the different angles
Also I have a firewire card in my comp, so if you ever need a hand capturing the vids, let me know.
Definately drop me a message when you get back, I wouldn't mind apprenticing with a rotary master for a few hours
No prob. You can always use a second camera to capture the different angles
Also I have a firewire card in my comp, so if you ever need a hand capturing the vids, let me know. Definately drop me a message when you get back, I wouldn't mind apprenticing with a rotary master for a few hours
Would you be interested in testing a few of my products in about 3 months or so? You'd get a huge discount on them, plus a couple free dyno's on your car.
There is no such thing as a ECU for a manual and a ECU for a automatic. A 91 ECU is good for automatic or manual cars. An ECU for a given year is good for either manual or automatic.Thats my understanding of ECU's.
email: trek1701@mnsi.net
Thread Starter
I wish I was driving!
Joined: Dec 2001
Posts: 5,241
Likes: 84
From: BC, Canada
tell me if this works asap.
Thread Starter
I wish I was driving!
Joined: Dec 2001
Posts: 5,241
Likes: 84
From: BC, Canada
Originally posted by ryandogg
i too would like a turbo 2 right up.. thanks..ive emailed you b4 but no responce??but no worries. i know you must be swamped with mails
i too would like a turbo 2 right up.. thanks..ive emailed you b4 but no responce??but no worries. i know you must be swamped with mails
I tried to email everyone I forgot, but apparently misplced yours.
Can I get an email addy?
Sean Cathcart
Hi Sean,
You sent me an email with the attachments but they were empty. I could see that they were word docs but they also said 0bytes. Could I trouble you to resend those?
Thanks
Dan
dansturbo2@earthlink.net
You sent me an email with the attachments but they were empty. I could see that they were word docs but they also said 0bytes. Could I trouble you to resend those?
Thanks
Dan
dansturbo2@earthlink.net
Originally posted by scathcart
Humblest of apologies. I have been away the past 7 weeks, and with only (very expensive) satellite-laptop connection, sending attachments was not on my list of priorities.
I tried to email everyone I forgot, but apparently misplced yours.
Can I get an email addy?
Sean Cathcart
Humblest of apologies. I have been away the past 7 weeks, and with only (very expensive) satellite-laptop connection, sending attachments was not on my list of priorities.
I tried to email everyone I forgot, but apparently misplced yours.
Can I get an email addy?
Sean Cathcart
xturborx7x@aol.com
thankx sean....
I recieved the email but my attatchments were also 0 bytes. Could you please try resending. Thank you.
hybridhonda@houston.rr.com
(I would like both write-ups please)
hybridhonda@houston.rr.com
(I would like both write-ups please)
Thread Starter
I wish I was driving!
Joined: Dec 2001
Posts: 5,241
Likes: 84
From: BC, Canada
Originally posted by Rx72Die4
I recieved the email but my attatchments were also 0 bytes. Could you please try resending. Thank you.
hybridhonda@houston.rr.com
(I would like both write-ups please)
I recieved the email but my attatchments were also 0 bytes. Could you please try resending. Thank you.
hybridhonda@houston.rr.com
(I would like both write-ups please)
That's my only guess....
Sean Cathcart
Thread Starter
I wish I was driving!
Joined: Dec 2001
Posts: 5,241
Likes: 84
From: BC, Canada
Originally posted by [bnd]
I'm not sure if my car would be the idea candidate, being N/A and auto, but if you have parts that'll work it can be the guinea pig
I'm not sure if my car would be the idea candidate, being N/A and auto, but if you have parts that'll work it can be the guinea pig
Maybe we'll have to fix that problem.
N/A is what I am looking for as a test car though.
Sean
Oh.
Maybe we'll have to fix that problem.
Maybe we'll have to fix that problem.
N/A is what I am looking for as a test car though.
Sean
Sean





