engine external gaskets?
#2
Full Member
Thread Starter
Join Date: Oct 2004
Location: Arizona
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
http://www.atkinsrotary.com/store/cu...id=16259&cat=0
or
http://catalog.drivewire.com/drivewi...20Gasket%20Set
wich one do u recomend?
or
http://catalog.drivewire.com/drivewi...20Gasket%20Set
wich one do u recomend?
#7
Junior Member
Join Date: Mar 2005
Location: Greensboro, N.C.
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Just the External Gaskets, Like for OMP, intake & exhaust? If thats what you are looking for try here.
http://rotaryresources.com/modules.p...=viewitem&id=9
$43.25
http://rotaryresources.com/modules.p...=viewitem&id=9
$43.25
Trending Topics
#8
Lives on the Forum
iTrader: (8)
Assuming you have an NA...
Lower, middle, and upper intake manifold gaskets, acv gasket, 6 port actuator gaskets, and exhaust manifold gasket, is all that you should need. $20 plus shipping for those.
I have no t2 gaskets to sell, if that's what you need. You didn't specify.
Lower, middle, and upper intake manifold gaskets, acv gasket, 6 port actuator gaskets, and exhaust manifold gasket, is all that you should need. $20 plus shipping for those.
I have no t2 gaskets to sell, if that's what you need. You didn't specify.
#9
Full Member
Thread Starter
Join Date: Oct 2004
Location: Arizona
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
i also need the one for the oil drain pan. (all the gaskets needed when installing a rebuld engine)
its an 87 N/A
its an 87 N/A
Last edited by 89tracerman; 04-06-05 at 12:26 AM.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
befarrer
Microtech
3
08-22-15 05:52 PM