2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Damn no fire!

Thread Tools
 
Search this Thread
 
Old Sep 2, 2004 | 01:51 PM
  #1  
flamin-roids's Avatar
Thread Starter
Lets rock.
Tenured Member 10 Years
 
Joined: Apr 2004
Posts: 1,355
Likes: 0
From: SLC, Utah
Damn no fire!

I always thought it would be pretty cool to get some total flamage out of my pipes. I've got a straight pipe on my '89 GXL and the car doesn't quite seem to want to spit flames. I've seen many a rx-7's with straight pipes that spit fire and the pipe gets red hot and glows. I had my girlfriend follow me in the GTU and tell me if I shot any fire and after punchin it and taking it up to 8k rpm no fire! And what bothers me is my girlfriend was right on my *** the whole time in our GTU. And it doesn't even backfire nor is it even loud. It has a bonez straight pipe. Anyways should I be worried there's no flames or backfire?
Reply
Old Sep 2, 2004 | 02:15 PM
  #2  
Syonyk's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jun 2004
Posts: 2,718
Likes: 1
From: Ames, IA
You might have somewhat clogged secondaries?

-=Russ=-
Reply
Old Sep 2, 2004 | 02:17 PM
  #3  
Aesop Rock's Avatar
Will Work For Apex Seals
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 1,277
Likes: 0
From: Lower NY
yea sometihng else is wrong, a straight pipe on an n/a should be rediculously loud.
Reply
Old Sep 2, 2004 | 02:32 PM
  #4  
flamin-roids's Avatar
Thread Starter
Lets rock.
Tenured Member 10 Years
 
Joined: Apr 2004
Posts: 1,355
Likes: 0
From: SLC, Utah
The car runs great. But I noticed the car doesn't have as much pull as my GTU at high rpm. In fact my GXL has more low end and less high end than my GTU. My car doesn't smoke or hesitate either.
Reply
Old Sep 2, 2004 | 02:41 PM
  #5  
Aesop Rock's Avatar
Will Work For Apex Seals
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 1,277
Likes: 0
From: Lower NY
i say check the 5th and 6th ports, and send out the injectors for a cleaning. cruzin perfromance does it for $12 an injector. cruzinperfromance.com
Reply
Old Sep 3, 2004 | 11:40 AM
  #6  
nates7's Avatar
haha my flame is bigger!
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 125
Likes: 0
From: san antonio TX
I have a bonez staright pipe with borla cat-backs. Its not loud at all that presilencer does alot. It sounds nice and deep out side and in the car but you can talk over it. Also if you have the stock exhaust manifold like me its not that loud. Try just reving it at idle to like 6 or 7 k and let it drop to like 5k then rev it up again. Just keep doing that untill it starts backfireing then some flames will come out. Mine just poke out for like a second and are like 2 inches long. Do you have the stock cat-backs? O also just wondering when was the last time you changed the tranny and rear end fluid. Also correct me if I am wrong but if his ports werent opening wouldent he fell some form of hesatation because he said it dosent hesatate.

Last edited by nates7; Sep 3, 2004 at 11:54 AM.
Reply
Old Sep 3, 2004 | 11:50 AM
  #7  
RXciting's Avatar
GrapefruitRacing?
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 2,155
Likes: 0
From: PartSource
i usually fine i start letting out flames when my exhuast starts heating up.. other then that it'll just do some small back fire
Reply
Old Sep 3, 2004 | 12:02 PM
  #8  
drft_180sx's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 702
Likes: 0
From: NYC/Stony Brook Univ.
Check my sig, I have that but a stock catback, and it's pretty loud. But i don't get flames either, I think the stock mufflers kill the flames?!
Reply
Old Sep 3, 2004 | 12:10 PM
  #9  
nates7's Avatar
haha my flame is bigger!
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 125
Likes: 0
From: san antonio TX
Yea for sure have you ever looked inside the exhaust outlet on stock cat-backs. You see a wall the fumes make like 500 turns before exiting the muffler.
Reply
Old Sep 3, 2004 | 01:19 PM
  #10  
wozzoom's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: May 2001
Posts: 903
Likes: 1
From: Conyngham, PA
Remove the dash pot off the throttle body.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
Jun 3, 2024 03:25 PM
Aramir
New Member RX-7 Technical
24
Oct 18, 2015 02:39 AM
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
baix2
Power FC Forum
1
Sep 28, 2015 09:40 AM




All times are GMT -5. The time now is 02:20 PM.