Cruise Clutch Switch Pad
#1
Cruise Clutch Switch Pad
After a few months had the car out yesterday and a distinct click every time pedal depressed,
so long story short. Looks as if some sort of pad on the clutch pedal has disintegrated and the
cruise clutch switch plastic plunger went into the vacated hole causing the noise.
I did a quick fix and installed a flat head plastic rivet into the hole, but anybody have a picture
of said pad?
so long story short. Looks as if some sort of pad on the clutch pedal has disintegrated and the
cruise clutch switch plastic plunger went into the vacated hole causing the noise.
I did a quick fix and installed a flat head plastic rivet into the hole, but anybody have a picture
of said pad?
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,828
Received 2,595 Likes
on
1,843 Posts
there are two, B001-43-029 and G030-43-029.
cheap, and very easy
cheap, and very easy
#3
As usual, you made it easy, thanks.
As there was blue debris all over the carpet, and the '91 TII rolling shell I have in the
pole shed has the blue piece still in the clutch pedal, G030-43-029 is the one and only $3.17.
Guess I'll purchase two, one for each car.
As there was blue debris all over the carpet, and the '91 TII rolling shell I have in the
pole shed has the blue piece still in the clutch pedal, G030-43-029 is the one and only $3.17.
Guess I'll purchase two, one for each car.
Last edited by Turbonut; 09-04-23 at 03:51 AM.
The following users liked this post:
j9fd3s (09-04-23)
Thread
Thread Starter
Forum
Replies
Last Post
ejmack1
3rd Generation Specific (1993-2002)
16
07-23-18 09:22 PM