Cold..
#1
Newbie
Thread Starter
Join Date: Jan 2003
Location: Cincinnati
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Cold..
Why dont wankels start easily in the cold. I don't know if anyone else has experienced it. But the car will not start when it is cold outside. Me and my friend can get a t2 for 200-300 bucks if we can get the bitch started.. so i wanna know if there are some ways to get it started i really want it.
#2
Shelby Tuner & FC badass
Join Date: Apr 2002
Location: Seminole, Florida
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
New plugs, change oil and add small amoutn of ATF... it should run, if not blown...
if the engine has been touched, check for off vaccum lines...
if the engine has been touched, check for off vaccum lines...
#7
I miss my FC
Join Date: Oct 2002
Location: oakville ontario
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
check for spark for starters and then put your thumb over one plug hole and crank you will know if you have compression and then listen for the fuel pump. if you have all the above try unplugging the fuel pump and starting it with the fuel in the motor because it is probably flooded. let me know if you get it started
Trending Topics
#10
thanks alot.. ill prolly get a chance to go try all this **** again.. but im going to buy a new battery.. im hoping thats not the problem is..
hmm.. im sure u guys know more than the 2 people on aol's chat.. half of them are posers and dont own the cars that they say they do...
brains....
hmm.. im sure u guys know more than the 2 people on aol's chat.. half of them are posers and dont own the cars that they say they do...
brains....
#11
Senior Member
Join Date: Jan 2003
Location: Tampa, Fl
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
I live in florida and my RX7 hates to start when its only like 40 degrees out.....Itll crank up and rev to like 3000 rpm then die.....i just work with it and lightly tap the gas till i can get it to respond to the pedal......then i hold it at 3 to 4k rpm for 15 seconds and its fine the rest of the day....
#12
Full Member
Join Date: Jan 2003
Location: wasilla, alaska
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Wow 3000-4000 rpm on a cold start thats insane. How much metal from the interior of yer engine do you end up pouring out when you change the oil? thats a big nono
Thread
Thread Starter
Forum
Replies
Last Post