Chaes problem to 2 possibilities- injector or injector plug? HELP!
#26
Rotary Freak
Join Date: May 2001
Location: Peoria, IL
Posts: 1,779
Likes: 0
Received 0 Likes
on
0 Posts
I would drop the gas tank and take it to a radiator shop, have it cleaned and sealed.
I would send the injectors to RC Engineering or Witchhunter or whomever you wish, have them cleaned and rebuilt.
Then replace the fuel filter and blow out all of the fuel lines.
That would be the most economical
I would send the injectors to RC Engineering or Witchhunter or whomever you wish, have them cleaned and rebuilt.
Then replace the fuel filter and blow out all of the fuel lines.
That would be the most economical
#28
F**K THE SYSTEM!!
Thread Starter
FINALLY FIXED THE PROB.
Ok. I ended up doing a little bit of testing with the volt meter. One of my injector clips had a weak reading. SO i ordered 4 clips. Got the new primary clips in. Put everything back together. ANd she cranked right up.=D
It was the injector clips all along.
Ok. I ended up doing a little bit of testing with the volt meter. One of my injector clips had a weak reading. SO i ordered 4 clips. Got the new primary clips in. Put everything back together. ANd she cranked right up.=D
It was the injector clips all along.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM