Chaes problem to 2 possibilities- injector or injector plug? HELP!
Rotary Freak
Joined: May 2001
Posts: 1,779
Likes: 0
From: Peoria, IL
I would drop the gas tank and take it to a radiator shop, have it cleaned and sealed.
I would send the injectors to RC Engineering or Witchhunter or whomever you wish, have them cleaned and rebuilt.
Then replace the fuel filter and blow out all of the fuel lines.
That would be the most economical
I would send the injectors to RC Engineering or Witchhunter or whomever you wish, have them cleaned and rebuilt.
Then replace the fuel filter and blow out all of the fuel lines.
That would be the most economical
Thread Starter
F**K THE SYSTEM!!
Joined: Sep 2006
Posts: 2,591
Likes: 1
From: Florida
FINALLY FIXED THE PROB.
Ok. I ended up doing a little bit of testing with the volt meter. One of my injector clips had a weak reading. SO i ordered 4 clips. Got the new primary clips in. Put everything back together. ANd she cranked right up.=D
It was the injector clips all along.
Ok. I ended up doing a little bit of testing with the volt meter. One of my injector clips had a weak reading. SO i ordered 4 clips. Got the new primary clips in. Put everything back together. ANd she cranked right up.=D
It was the injector clips all along.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
