Can you run a Jspec ECU and Harness on a USDM Car
04-16-10, 03:34 PM
#1
TBROC
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Tampa Florida
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Can you run a Jspec ECU and Harness on a USDM Car
trying to do a turbo swap on my 90' NA.
would this Work:
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_4273wt_907
as long as i get a turbo shaft? I already have the hood and brakes
would this Work:
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_4273wt_907
as long as i get a turbo shaft? I already have the hood and brakes
04-16-10, 09:13 PM
#5
Rtek will chip the N374. I specifically asked if it solved this problem. The answer was that at Pocketlogger, they were unaware of any 'problem' with 374 ECU's.
A little searching found that the 374 (unchipped) will usually work with an original S5 Turbo. It will almost NEVER work unchipped with an S5 N/A-Turbo conversion.
Bottom line if you can find a 370, it will always work.
-Jack
A little searching found that the 374 (unchipped) will usually work with an original S5 Turbo. It will almost NEVER work unchipped with an S5 N/A-Turbo conversion.
Bottom line if you can find a 370, it will always work.
-Jack
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM