For those who have the Toki Blue's + Rb Springs setup, how bad of a negative camber did you guys get for the back? and which camber adjuster or subframe multilink did you guys use to fix it? or if neither, how did you fix the camber?

 

Flatout motorsports sells a rear camber adjuster for $100.

 

ooo i see, thanks.
btw, i saw the site and the picture, does go across from left to right? or do i buy two, one for left and one for right.

 

It goes up and down.

It alters camber by changing the subframe orientation.

 

so then i do need two? i presume.

 

Racing Beat sells one, and Mazdatrix has a couple as well as the individual ones for each wheel. With my RSR Race springs I had about -2.6 degrees camber. I used the RB Rear Camber Link and shortened it the suggested amount and got +.06 degrees out of it without dimpling my floor pan. I plan to go a bit more with some floor pan dimpling.

And you can either buy the single subframe link or the seperate individual adjusters for each wheel. Look at the Mazdatrix or Racing Beat websites and you will see.

 

so for the rb one, you had to buy two or one?

 

one