i was just doing my emissions removal on my 87 turbo and i noticed that one of the omp lines that run to what looks like the lower intake manifold are broken in half. does anybody have a fix for this or is there any other kind of line that i can run in place of it?

 

you can buy the lines at Mazdatrix.com for $24 each, might as well do them all while your at it.

or you can build your own, search for "rebuilding OMP lines" on here, I saw a write up that had part #'s to rebuild these lines for very little $$. The fitting were less than $1 each and the tubing itself is cheap.

 

so i wont have to remove the oil injector itself from the lower intake manifold or the rotor housings just to replace the lines correct?

 

https://www.rx7club.com/2nd-generation-specific-1986-1992-17/omp-oil-lines-709973/

this link will help you cost about 30 bucks with shipping for the whole kit that u need to make ur OMP lines

 

hey i have a question i had my gxl diagnosed and it came back that the omp was bad,mop or sort in the harness could i tell you what is going on and see if you could tell me what you think