Can someone take a picture of it? The picture must show where the sensor is mounted.
Im still modding my Jspec emisson harness :S and it seems like the sensor is mounted on a totally different spot.
I cant find the sensor anywhere on my car. I think i aint got it. But can i use a different sensor? aftermarked stuff or from a different car?

 

http://www.camdensuperchargers.com/index.php?pag=12
Scroll down to picture figure 8. It's to the left of the rubber coupler on intake, just under the strut brace on the side of the strut tower.

 

Thanks, i aint got it on my car

 

I also got another problem. I found this thing (on the picture) looks like a resistor to me but the connector doesnt fit any other connector, and i cant find it in the FSM/Wiring diagram. What is it? and where can i find it in the FSM?

 

okey... This is very offtopic but i cant make new threads.. Why?! i always get a "proxy failure".. Even when i search for topics i got a "proxy failure"... What is it?

The new thread i wanted to make was about my starting problems:

**Hi all,

I was finally ready to start the engine.. After much back and forth i got it up and running but had to stop it again. Yesterday i tried to start it again.. It wont start easy. Actually it didnt start at all! I got fuel pressure (i can hear the fuel runs into the fuel line at the engine).. I also got spark on the plugs!
The engine hasn`t run for about 2years and my ACV is removed.
What can i do to start it? When it was warm it started easy. Startliquid? Fuel into the rotorhouse?

**

 

Like this!
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request POST /newthread.php.

Reason: Error reading from remote server

 

The Proxy Error probably has something to do with the Forums server, not you.

The aluminum covered resistor package is called a Solenoid Resistor and is used on cars earlier than 1987 1/2. It's composed of four 6ohm resistors that feed the fuel injectors the 12vdc.

 

Okey, thanks