Bad Driveshaft???
#1
dAracIngPhaRmaCist
Thread Starter
Join Date: Mar 2004
Location: Fort Lauderdale
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
Bad Driveshaft???
OK, so I think that I narrowed down my clicking noise to the U-joint... I think it is bad.... also, I think the front diff. mount is bad too because I hear a clunck sometimes during take off..... But now, during acceleration, whenever the driveshaft starts to spin, underload, the click starts... when driving the car with shift boot and everything completely removed I can literally see the driveshaft move forward a little bit, I think that is why it is clicking it must be hitting metal.....
Anyway, how do I check both, the driveshaft U-joint and the diff. mounts? And does this problem happen often? I did a search but only found a couple threads, neither of which had clear answers...... Thanks for the help..
Anyway, how do I check both, the driveshaft U-joint and the diff. mounts? And does this problem happen often? I did a search but only found a couple threads, neither of which had clear answers...... Thanks for the help..
#2
Super Raterhater
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,627
Likes: 0
Received 2 Likes
on
2 Posts
Crawl under the car and see if the driveshaft has any play in it, try to push it forward/back and turn it, it should be nice and solid and not have any slack. As for the diff mount, you can try to push up on the end of the driveshaft, and if it moves up at all, chances are it's toast.
#3
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
As a U-joint starts to fail, it first looses it's grease, then the needle bearings start to wear and make slack & excess clearance.
The extra wear sometimes allows the shaft to wobble off center giving vibration.
Then the needles start to rub & bind on each other.
As they bind & pop free from binding, you can hear a "tink" sound that rings the tubular shaft.
This can usually be heard just as you start moving.
Visual inspection shows rust deposits near where you would normally see grease residue.
The extra wear sometimes allows the shaft to wobble off center giving vibration.
Then the needles start to rub & bind on each other.
As they bind & pop free from binding, you can hear a "tink" sound that rings the tubular shaft.
This can usually be heard just as you start moving.
Visual inspection shows rust deposits near where you would normally see grease residue.
Last edited by SureShot; 10-18-05 at 06:46 AM.
#5
ok my ujoints are going soon. and i just got a rebuilt tranny as well as installed new diff bushings and when driving ill press the clutch in and shift to nutral then i cant put it into 1st until i let the clutch out hear a pop then press the clutch and put it into 1st. happens about 50 percent of the time. is this from my driveshaft and ujoint?
#6
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by 1300ccTuner
ok my ujoints are going soon. and i just got a rebuilt tranny as well as installed new diff bushings and when driving ill press the clutch in and shift to nutral then i cant put it into 1st until i let the clutch out hear a pop then press the clutch and put it into 1st. happens about 50 percent of the time. is this from my driveshaft and ujoint?
Trending Topics
#8
dAracIngPhaRmaCist
Thread Starter
Join Date: Mar 2004
Location: Fort Lauderdale
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
I think its the u-joint.. because mines did the same thing because the diff mounts were frigged so when underload, the **** would move forwards and backwards hitting ****... Thats where the clicking noise came from... Well, I am looking for a driveshaft now... Where can I get one (preferebly one w/ a replaceable u-joint) and diff mounts... Remember I need all, but only have like $4-500 on me right now.... thanks...
#12
dAracIngPhaRmaCist
Thread Starter
Join Date: Mar 2004
Location: Fort Lauderdale
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
couldnt find the driveshaft on rx7.com (maybe I wasnt lookin in the right places) but the aftermarket driveshaft from mazdatrix seems like a good deal with the replaceable u-joint and all... its only $238... does anyone have any input on these?
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM