2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Bad Coil Spings?

Thread Tools
 
Search this Thread
 
Old Feb 4, 2002 | 10:58 PM
  #1  
myron96's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2001
Posts: 127
Likes: 0
From: Baltimore, MD
Bad Coil Spings?

Querstion. If I press down on my front left fender, and there is a groaning noise coming from the area of the strut mount, however, i replaced the strut mount, could it be a bad coil spring? when I lift up on the fender after pressing down on it, the fender rises up a bit, and the groaning noise happens again.. Any ideas?

John
Reply
Old Feb 4, 2002 | 11:00 PM
  #2  
amemiya's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 675
Likes: 0
From: USA
struts
Reply
Old Feb 4, 2002 | 11:29 PM
  #3  
Poindexter10thae's Avatar
AKA Poindexter
Tenured Member 20 Years
iTrader: (2)
 
Joined: Apr 2001
Posts: 632
Likes: 0
From: Austin, TX; JABLAM!, WA; Iraq
1. cut the wheel all the way in the direction of the suspected bad strut/spring.

2. try to do a power brake or just like a slow doughnut, if the sound emits, it is the strut.


The groaning sound is most likely a strut, the coil springs will make a popping sound. When you replace the strut, check the spring anyways to see if it is warped/bent/mishaped.
Reply
Old Feb 6, 2002 | 09:23 AM
  #4  
myron96's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2001
Posts: 127
Likes: 0
From: Baltimore, MD
Hey, thanks guys. Im gonna check the strut... JOhn
Reply
Old Feb 6, 2002 | 12:10 PM
  #5  
FPrep2ndGenRX7's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: May 2001
Posts: 770
Likes: 0
From: AL
Might want to check the bushings on the lower control arm also. The factory oil cooler lines are known to start leaking when they get older and they are near the front bushings. The oil will eventually break down the rubber.
Reply
Old Feb 6, 2002 | 01:24 PM
  #6  
SureShot's Avatar
Seduced by the DARK SIDE
Tenured Member 15 Years
 
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
My 91 suspension groans & clunks. It's due for new bushings. Your 85 may be over-due for bushings.
Reply
Old Feb 6, 2002 | 01:48 PM
  #7  
Grimlock's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 628
Likes: 0
From: Miami, Fl.
hmmmm

i didnt know our cars had spings????
Reply
Old Feb 11, 2002 | 07:59 AM
  #8  
myron96's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2001
Posts: 127
Likes: 0
From: Baltimore, MD
Hey! I fixed the problem, turned out to be the stut mount, all I had to do was to rotate it about 90 degrees, and its perfect!!! No More noises!!!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
windom
Adaptronic Engine Mgmt - AUS
4
Sep 11, 2015 04:48 AM
SakeBomb Garage
SakeBomb Garage
0
Sep 4, 2015 05:20 PM
SakeBomb Garage
Vendor Classifieds
0
Sep 4, 2015 05:19 PM




All times are GMT -5. The time now is 12:11 AM.