TripGreeley

Has anyone used on on an FC? Is it worth installing? I have one that I was gonna use on my Integra but I decided it was overkill with my Hondata. I have no way of tuning my FC so i will install it if I can get any feedback. Lemme kno what ya think

Gaber

I have on my car.. It is same as safc, but with vafc you can control and tune map for water injection, nos etc...

therotaryrocket

let us now how it goes, I have some interest in an SAFC and yes I know people install them on FCs I've seen pics and I think there is a write up telling you exactly which pins at the ecu connectors you need to tap into.

TripGreeley

I will leave the splicing to someone a little more experienced than me. I had to replace my entire main body harness last year and it was not pretty. Had to dismantle the whole car almost. I wanna hear from someone actually using one tho! I want to hear results and know if I'd be wasting my money

Gaber

Ok, i will post a how to wire up apexi vafc to FC3S.. wire, settings etc..

Gaber

Here is my write up, I AM NOT RESPONSIBLE FOR ANY DAMAGE

How to wire up vafc2 to S4 & S5 fc3s..

Brown wire ( ground ) wire up closer to ecu ( 1" , 1.5 " from ecu plug )



I don't have ecu pin out for S5, where is pin for pressure sensor..

This picture you can use for safc/vafc install




Setting on vafc2 i will give later..

Here is good reading..

http://www.drifting.com/forums/tech-...-settings.html ( here you have settings.. )

http://www.1300cc.com./ ( here is guide how to install & settings too , but safc )

http://members.***.net/precisionimag...image/SAFC.htm ( too understand about tuning a safc/ vafc )

therotaryrocket

your the man, thanks for this. I need to get one of these soon, its close to the top of my list.

Gaber

No problem..

There is apexi ITC ( Ignition Timing Converter ) also, i don't have experience with this, but looks very good with safc / vafc...

http://ca.dsm.org/tech-sitc.html ( best link about apexi itc )

Gaber

My setting on vafc2 are..

4 cyl THR arrow up or you can put *
Flap type sensor
Sensor No. 5in 5out

flaco

iTrader: (7)

sorry to bring this back up but the vafc2 does not give the option a sensor type

how you said you have it on flap??