2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

antenna

Thread Tools
 
Search this Thread
 
Old Nov 1, 2007 | 08:16 PM
  #1  
silverbulletrt02's Avatar
Thread Starter
Dreams bigger than wallet
Tenured Member 10 Years
iTrader: (10)
 
Joined: Jul 2007
Posts: 547
Likes: 0
From: Chicago South suburbs
antenna

is there any way to lower the antennea without having a radio in the car? somebody hacked up my radio wiring, and i bought a car cover, and it obviously won't fit with the antennea up.
Reply
Old Nov 1, 2007 | 08:50 PM
  #2  
micah's Avatar
Winter sucks
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 3,083
Likes: 0
From: Newberg, Oregon
Originally Posted by silverbulletrt02
is there any way to lower the antennea without having a radio in the car? somebody hacked up my radio wiring, and i bought a car cover, and it obviously won't fit with the antennea up.
If you ground the wire for the antenna, it will go up, if you unground it, it'll go down.
As per the FAQ: LtBlue/Yellow= -power ant trigger

You could make yourself a little switch or ignition relay for that... Check the FAQ, there's a relay example in it for that.
Reply
Old Nov 1, 2007 | 10:49 PM
  #3  
Chris RX-7's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Mar 2006
Posts: 66
Likes: 0
From: Clearwater FL
Replace the stupid thing with a short rubber mast one from autozone... the antenna assembly on our cars weighs like 5lbs and gets terrible reception.
Reply
Old Nov 1, 2007 | 10:54 PM
  #4  
micah's Avatar
Winter sucks
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 3,083
Likes: 0
From: Newberg, Oregon
Originally Posted by Chris RX-7
Replace the stupid thing with a short rubber mast one from autozone... the antenna assembly on our cars weighs like 5lbs and gets terrible reception.
Actually, it weighs 1.2lbs and gets great reception (atleast it has for me).

If you think those rubber ducky antennas from autozone/napa get better reception, you had something wrong with your stock antenna.

Plus... the retractable antenna looks great when the car is off. No autozone parts on my baby... short of like.... Sylvania headlights.

Also, I have epilepsy and your signature almost gave me a seizure.. You might want to change it.
Reply
Old Nov 1, 2007 | 11:11 PM
  #5  
Chris RX-7's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Mar 2006
Posts: 66
Likes: 0
From: Clearwater FL
Yeah my antena motor was fried when i got my car... but the rubber ducky gets better reception than oem, I had another fc guy try it.

P.S How about a warning label

:-o EPILEPSY AND SEIZURES READ THIS NOTICE BEFORE YOU LOOK AT THE FOLLOWING SIGNATURE :-o
A very small portion of the population have a condition which may cause them to experience epileptic seizures due to viewing certain signatures on rx7club.com
If you think you may suffer from epilepsy, DO NOT CLICK ON THIS LINK!
Reply
Old Nov 1, 2007 | 11:14 PM
  #6  
TehMonkay's Avatar
Back in the game
Tenured Member 10 Years
iTrader: (-1)
 
Joined: Nov 2005
Posts: 2,456
Likes: 2
From: Louisville KY
OEM looks better, works just as well.

Plus if your exhaust is done right you cant even use a radio ; )
Reply
Old Nov 1, 2007 | 11:16 PM
  #7  
TehMonkay's Avatar
Back in the game
Tenured Member 10 Years
iTrader: (-1)
 
Joined: Nov 2005
Posts: 2,456
Likes: 2
From: Louisville KY
also, he may have disconnected the wiring harness for the antenna in the hatch area to keep it from going back down.

Its on the left when you open the hatch, back where the tail lights are, 4 pin connector.
Reply
Old Nov 1, 2007 | 11:51 PM
  #8  
NZConvertible's Avatar
I'm a boost creep...
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
Originally Posted by silverbulletrt02
is there any way to lower the antennea without having a radio in the car?
It must have been raised and then unplugged from the harness. If it's plugged back in, and the relevant fuses are okay, it'll go down on its own even if there's no radio. It needs a signal (a switched ground) to go up, without that it'll drop.

Originally Posted by Chris RX-7
...the antenna assembly on our cars weighs like 5lbs and gets terrible reception.
Wrong on both counts.
Reply
Old Nov 2, 2007 | 04:03 AM
  #9  
88rexvert's Avatar
doesnt obey speed limits
 
Joined: Oct 2007
Posts: 34
Likes: 0
From: Philly, PA
my antenna doesnt go down. when i turn off the radio i hear the motor come on but the antenna stayes up, must be off the gear or guide track. is there any way to take it out with the antenna extended?
Reply
Old Nov 2, 2007 | 08:35 AM
  #10  
pfsantos's Avatar
(blank)
iTrader: (1)
 
Joined: Nov 2005
Posts: 2,285
Likes: 15
From: YYZ
Have someone switch the radio off with you at the antenna gently pushing and turning the top of the mast. You may be able to engage the mast's gear cable to the motor. If this doesn't work, you have broken cable pieces in there and need to take the power antenna out and open it up.
Reply
Old Nov 2, 2007 | 09:26 AM
  #11  
silverbulletrt02's Avatar
Thread Starter
Dreams bigger than wallet
Tenured Member 10 Years
iTrader: (10)
 
Joined: Jul 2007
Posts: 547
Likes: 0
From: Chicago South suburbs
I'll have to give all these a try this weekend. Thanks!
Reply
Old Nov 2, 2007 | 12:08 PM
  #12  
88rexvert's Avatar
doesnt obey speed limits
 
Joined: Oct 2007
Posts: 34
Likes: 0
From: Philly, PA
ok il try that. thanks!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Directfreak
Interior / Exterior / Audio
2
Feb 3, 2002 11:17 PM
cjf
1st Generation Specific (1979-1985)
4
Feb 2, 2002 05:38 PM




All times are GMT -5. The time now is 08:41 AM.