300hp
#27
Rotary Slave
iTrader: (3)
Originally Posted by Digi7ech
I'm not too sure an rtek 1.7 would support that HP.
1.7 is rated safely to 14psi on stock turbo. That's a good 50-100hp less than your desired range.
I would recommend gettign a Rtek 2.0 with 720's all around or maybe bigger secondaries just as a precaution.
I always prefer to stay on the safe side when it comes to a $2,000+ motor.
The motor can be more reliable when you put less strain on the setup to produce that number. Like mentioned above, 8psi on a larger turbo will last longer than 16psi.
1.7 is rated safely to 14psi on stock turbo. That's a good 50-100hp less than your desired range.
I would recommend gettign a Rtek 2.0 with 720's all around or maybe bigger secondaries just as a precaution.
I always prefer to stay on the safe side when it comes to a $2,000+ motor.
The motor can be more reliable when you put less strain on the setup to produce that number. Like mentioned above, 8psi on a larger turbo will last longer than 16psi.
Thread
Thread Starter
Forum
Replies
Last Post
WestJaxVert
Rotary Car Performance
4
05-13-04 09:40 PM