2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

1st gen needs 2nd gen turbo purchase advise

Old Apr 24, 2003 | 10:27 PM
  #1  
slag's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 71
Likes: 0
From: Kansas
1st gen needs 2nd gen turbo purchase advise

I am a sa/fb guy, but a guy who lives here in town approached me about buying his 87 tII. I looked at it and checked the compression in the motor and it is good. The body is shot, but thats ok since I have a 2nd gen convertible I can drop the motor in. The car also has 5 lug A.R.E rims, looks pretty nice, kind of like 5 spokes on a grand prix. He said the motor is an 85 13b with the 13bt turbo on it and it looks just like the pictures.

At any rate, he is asking 400.00 for the setup. I think I can talk him to 250/$300 or that ballpark. He said the motor has a problem.. It idles extremely rough and always floods after its shut off, even after running it at operating temps.

So, ideas? Should I go drag the car home, or leave it?
Reply
Old Apr 24, 2003 | 10:37 PM
  #2  
darkwaveboi's Avatar
Need donor car in Fairfax
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 1,759
Likes: 0
From: Northern Virginia
drag it home, rebuild it and port it..put it in an FB and love life
Reply
Old Apr 24, 2003 | 10:51 PM
  #3  
rxseven's Avatar
Special Dark
Tenured Member 10 Years
 
Joined: May 2001
Posts: 820
Likes: 0
From: oklahoma
sounds like his injectors are in bad shape. It's a good buy for like $300.
Reply
Old Apr 24, 2003 | 10:59 PM
  #4  
slag's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 71
Likes: 0
From: Kansas
Are the injectors throw-aways or can they be cleaned or rebuilt?

Thanks

I've never had a car that had bad injectors. Is this common with this gen/engine?
Reply
Old Apr 24, 2003 | 11:06 PM
  #5  
Scott 89t2's Avatar
SOLD THE RX-7!
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 7,451
Likes: 0
From: Vancouver, BC, Canada
Re: 1st gen needs 2nd gen turbo purchase advise

Originally posted by slag
about buying his 87 tII.... He said the motor is an 85 13b with the 13bt turbo on it

umm..... if that is true I'd probably stay away... the 13b and 13bt engines are 99% different. if he put a turbo onto an 13b engine there was some gheto riging involved... and it'll never be the same as a 13bt.

you sure it's not still a 13bt engine??

also the rough idle and flooding means the engine is probably almost dead anyways.
Reply
Old Apr 25, 2003 | 07:59 AM
  #6  
slag's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 71
Likes: 0
From: Kansas
Honestly, no, I don't know, I am just going on what the guy told me.

I am going to go check it out a second time. I figure the rims alone are worth the cost of this car, everything else is just gravy. Maybe I could part out the turbo unit, etc.
Reply
Old Apr 25, 2003 | 08:03 AM
  #7  
1987RX7guy's Avatar
Eat Rice Don't Drive it.
Tenured Member: 20 Years
iTrader: (3)
 
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
THe injectors can be rebuilt and cleaned proffesionaly.

What is wrong with the body???
Reply
Old Apr 25, 2003 | 08:43 AM
  #8  
West TX RX-7's Avatar
Da Monee Pit
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 843
Likes: 0
From: Littlefield, Texas
I'd buy it for that price. Hard to beat. If the compression is good he may just have fuel or ignition problems. If nothing else you could send that engine in for a rebuild and still come out smelling sweet.
Reply
Old Apr 25, 2003 | 08:57 AM
  #9  
slag's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 71
Likes: 0
From: Kansas
Originally posted by 1987RX7guy
THe injectors can be rebuilt and cleaned proffesionaly.

What is wrong with the body???
It would be easier to say whats right with the body.

It has a trailer hitch on it and the trailer came loose at one time and slammed into the passenger rear taillight lense housing and cracked the lense. someone tried to bondo it up and covered it with what looks like flat white house paint. Guy says it was like that when he got it.

The car has cracks and dents and chips all along it and is filthy. The guy put his motorcycle parts/truck parts, etc in the rear and on the seats so everything is covered in dust, oil, and grease.

The windshield is cracked.

The rims and rubber look very good though.

The dash is cracked in many places. The wheel well area is all dented and has alot of surface rust.

the list goes on and on and on.
Reply
Old Apr 25, 2003 | 09:35 AM
  #10  
Crionics's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 486
Likes: 0
From: KY
Re: 1st gen needs 2nd gen turbo purchase advise

Originally posted by slag
He said the motor is an 85 13b with the 13bt turbo on it and it looks just like the pictures.
Sounds like a definite buy, except this worries me. What was the compression of the S3's?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mustanghammer
Race Car Tech
28
Nov 22, 2015 07:10 AM
Turblown
Vendor Classifieds
0
Aug 18, 2015 10:01 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM
Marty RE
New Member RX-7 Technical
0
Aug 13, 2015 11:19 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:30 AM.