by request, autox fc ***pics
#53
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Houston
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
i repeat. the car isn’t finished (i thought the cleco's were a dead givaway). that goes for the fenders to. the fenders will get molded in and the car whole will be painted. there was no point in finishing the car until i knew the 315 a6's fit. the car is not, not finished. I am modding this car and concurrently autoxing every event, i am doing as much as i can between them. as far as the wing... If i didn’t want to be competitive in SM2 I most likely wouldn’t have put it on. but now I ADORE it and am never taking it off!!!
#62
Crash Auto?Fix Auto.
iTrader: (3)
they're cleco's. They're not permanent........
Excellent FC by the way. Lots of out of the box thinking there, I'm really diggin' it. Whats the rough capacity of the oil system after the cooler relocation? I noticed you're also running the pineapple pan. With my PR pan and stock oil cooler I'm fitting 6 litres in without dumping the cooler directly, 6.5 if I do. I'm guessing you must be pushing 7L or more with all the plumbing??
Sweet job, love the 315's and rim choice also
Excellent FC by the way. Lots of out of the box thinking there, I'm really diggin' it. Whats the rough capacity of the oil system after the cooler relocation? I noticed you're also running the pineapple pan. With my PR pan and stock oil cooler I'm fitting 6 litres in without dumping the cooler directly, 6.5 if I do. I'm guessing you must be pushing 7L or more with all the plumbing??
Sweet job, love the 315's and rim choice also
#65
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Houston
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
thanks everyone!!!
8.5 quarts (big cooler)...
carbon creation canards.
looking to finish the bodywork and paint over winter(if thats what you can call it here)
the new mani and turbo stuff should find its way on here in a couple weeks...
https://www.rx7club.com/single-turbo-rx-7s-23/my-first-13b-turbo-mani%85-howd-i-do-767481/
8.5 quarts (big cooler)...
carbon creation canards.
looking to finish the bodywork and paint over winter(if thats what you can call it here)
the new mani and turbo stuff should find its way on here in a couple weeks...
https://www.rx7club.com/single-turbo-rx-7s-23/my-first-13b-turbo-mani%85-howd-i-do-767481/
#67
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Houston
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
#69
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Houston
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts