Still waiting for the projectors to get here, the HID kit is already installed but I need the projectors/

 

I wanna see this progress

Form > function for you. Not surprising. That's............... fantastic ........ special or just

 

i second that, want to see the progress my friend, maybe write up???

 

**** i am having a lots of problem with mine
retro fit is done i putthe projectors closest to glass possibel but still its not fitting
fx projectors are jut too big i need to cut inside the housing to fit them

 

That's why I bought the TSX projectors, they are the most compact and have a wicked good beam. I just spoke to the guy who I bought them from and he said they were shipped on Friday so they should be here any day.

 

just a couple pictures, i ll post a new threath with lots of pictures and writing when i am 100% complete with night shots

 

write up please... or i will pay you for you to make me one haha

 

Looks good so far. That's really all I was planning on doing. Can you post better pics of how you attached the projector to the housing itself. I was planning on adding a sheet of ABS to the back of the housing and mounting the projector onto the added sheet so it was level. I like the black housings though, that should make it look pretty good.

Post a link to the new thread when you make it. My projectors should be here today or tomorrow, then we can see the difference between the FX and TSX projectors.

 

Anyone know of some low beam projectors that are SHORT and 4" round? I'm looking to refit my East Bears but unless I want to do some metal cutting, I need them to be pretty shallow.

 

The housing "glass/plastic" doesn't have ribs across the front, like it does on the sides, does it?

 

be cool if you could fit those in some camaro headlights to be a lil more low profile

 

lol no i am not doing one again. But yea i ll post a writing with all pictures when i am all done cause i am still changing couple of thigs to fit it inside so i dont wanna give any wrong ideas
no its actually not that bad of a headlight for a retro fit its a clear glass
lol i wont normally use it thoug projector on it just a bent glass and light output is so crappy
because my projectors were lot bigger in diameter than other ones only thing i had to do was just cut it on right spot where circle projector part fits in and i did a jb wel around it and inside.
I am about to paint inside all black again cause jb wel looks so bad inside

 

looks good so far bro... keep it up, look forward to the write up

 

https://www.rx7club.com/showthread.php?p=8957438
this is the new link to my thread got some problem with nw pictures i am gonna load them again when i get back home tonight

 

Hella 90mm Modulales available @ rallylights.com. Links provided earlier

 

I just got my projectors in today, FedEx screwed up but overnighted them last night to make it up. I got the TSX projector housings, 4300K bulbs and D2S to AMP connectors so I can retain my current ballasts.



I should get around to hacking up my old 7x6's this weekend.

 

Man...another thing to add to the list heh.

 

I decided to give it a shot and cut up one pair of old diamond cut housings...

 

r u gonna loose high beams?

looks good

 

don't you automatically lose high beams with a HID kit?

check out these ones I think they are NSX headights Hypertek can confirm im not sure.

 

Some HID projector units (BIXENON) use a small motor to move the shield and change the cutoff for low and high beam - the TL is like this. Some systems have an extra halogen bulb for high beam right next to the HID lamp. However, I am going to lose my high beam because the TSX is a single low beam projector.

Yes the NSX lights are cool but they are hard to find last time I looked compared to H6054 housings.

 

francogt1 id have no idea man your guess is as good as mine lol

sadly the nsx lights are pretty darn pricey when they go on ebay

njgreenbudd i cant wait to see some night pics of that setup

 

Perfect picutre man! thats all that i need to get my HID's started... I was looking for the D2S to AMP connectors. where did you fine yours??? let me know man

 

im curious if cops will still have a heart attack about these.. generally any mods on an older car will trip the cop radar lol

 

they shouldnt cause u ll be only lighting up the road not ike the pnp kits that lights up everything
As long as u adjusted right ur beam shoudnt pass over other cars hood