okay was about to unbolt everything, but i wanted one last try. I pushed the starter button and it cranks!? 3 days ago it was jammed, i thought my engine was seized. I started the engine and reved it to 3.5 for 20 seconds, then let it go it idled at 1700..Weird..I drove it and it over heated in less than one minute of driving, took it back on my driveway and it was boiling hot in the ccollant overflow tank, and engine was overheating too.

i dont get it????

 

check your thermostat and change your radiator cap,

same thing happened to me, turned out my radiator cap spring was fucked, which cause the car to over heat and coolant to over flow from the resevour.

 

maybe go back to mechanical fan, did ur electric come on?

 

i changed the rad cap, didnt help. It really does get hot even just idling there. The rad. hoses expand! Also the engine seems slugish when you rev or slow . Do you think if i get a s4 t2 afm itl help? Im using a s4 na one n318...

burned my arm....

 

im gunna try what charlie said, proably air pocket in the motor...bleed the air out

 

If your rad hoses are swelling replace them.

 

Jumper the initial set coupler and get a timing light on there!

Seriously if your car starts the compression is good enough, sluggish performance is either a fueling or ignition timing problem. Easiest thing to make sure is right first is the timing!

 

i got the air pockets out, but still overheats quick...Acid angel says it could be the coolant seals busted...going to tear the motor apart tmrw and just start all over again..

 

wow. that sucks. so much work.

 

damn ey dk hit me up!

 

alrite pulled the motor today..Just abit lazy right now to open her up...

 

shes open. Looks like Acid angels hunch was correct, all but one inner water seal blew causing my engine to overheat. Maybe my water pump is bad causing this.. all the apex seals are still good, housing rotors.. A few corner seal springs seem flat almost lol,perhaps cauing me to loose compression. Before opening her, I turned the flywheel, and it sounded good, pshhhhwaaahh sound...ALot more than when I first built the engine.. I ordered the new rebuild gasket set, so for now just cleaning the parts.. acid angle might hook it up with the carbon apex seals...

 

 

random pix to keep this thread from boredom
damn love this gif

 

Damnit Daniel!!!! I Love Your ******* Car!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

planing on porting out the intake ports and exhaust ports even larger tmrw..
Going to stop by mazdatrix in the afternoon to pick up some rebuild parts. I sold my black shell for $100. So I have $100 now. WIll get new corner springs [fd], side seal springs, bearing plate, front and rear main seals, hopefully they have a used e shaft for sale[mine has scratches from the seize] I did order a gasket kit on ebay.. So im all set...

 

himeh, for your bridge port, who is porting it?? how is that comin along? Did you get your rebuild kit yet

 

man you got some great parents =p

 

yuck fram filter

 

dks gone mad. holly batman. Im not sure what I was thinking, but this will be perfect for xmas ! or If I ever get my hood popped py popos hopefully itll shed some jinglebells and joy on them

 

LArger streetport..

 

 

I still cant believe I did This lol.. But its growing on to me, I think it may suit my car well.. ROFL. Pics dont do much justice, it looks crazier in person.. Its still has alot of metal shavings all over.. will clean it up and start prepping everything until my rebuild parts come in..

 

did you jus spray bomb it? lol
is that even safe for ur altenator???

that drifter ego is kickin in!! haha im messin man

 

I need to get another can of that red... Do a few more coats to dress it up..