When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2/5/2010:
final coat of filler is on, and sanded in most area's. touch up filler is applied, and ready to be shaped in the morning, car will be in primer and blocked by sunday.
you can see where the body line on the door still has a sharp edge, and the 1/4 panel has allready been rounded off....the door will be shaped in the morning.
I would skin that whole door, they originally bulge out to meet the fender and 1/4 and are lower in the center, its one of those things that will really show up when the car is shiny black again
I would skin that whole door, they originally bulge out to meet the fender and 1/4 and are lower in the center, its one of those things that will really show up when the car is shiny black again
i didn't repair the door, i replaced it, the 1/4 was pulled and shaped to fit the factory door, the bulge is still there, just hard to see it the pics because of the matt finish on the filler.
the driver side looks identical to the passenger side.