bnr turbo
Thread Starter
Senior Member
Joined: Nov 2006
Posts: 255
Likes: 0
From: san francisco
bnr turbo
Hey i was about to upgrade to a hybryd turbo bnr turbo stage 2. Is there any body that is running the stage 2 bnr turbo or just a bnr turbo. Please tell me how do yu like how does it run im looking for 330 350hp .fully built mortor just need a power fc and new turbo so please let me no what my best turbo buy should be. Can valch for bnr turbos?
BNR turbos are the best and easiest way to retain the stock manifold, downpipe, and coolant/oil hardlines. A stage 2 might not be enough. It's recommended you get a stage 3 or even a 4. They are the easiest upgrade you can do to make a lot higher horsepower numbers than stock.
Oh and I sent you a pm about my BNR turbo if you wanna buy it. It's a stage 3.
Oh and I sent you a pm about my BNR turbo if you wanna buy it. It's a stage 3.
I make just under 350 with my stage 3 on a very conservative tune. Ive been using this turbo for over a year now, and am more than happy with it. Its built very well and there is little to no lag.
Trending Topics
OP just use the salch function and you'll find this: https://www.rx7club.com/time-slips-dyno-128/bnr-turbo-dyno-sheets-please-629521/
Why is this in the non-technical section 
?
Anyway, all the information you'd need is on Brian's site: http://www.bnrturbos.com/2ndGen.htm.
? Anyway, all the information you'd need is on Brian's site: http://www.bnrturbos.com/2ndGen.htm.
I have a BNR Stage 2 and made 300.01whp at 12psi (redline, 15psi max). I probably have some boost leaks, so I'm sure it's capable of doing 320ish with everything buttoned up. Decent spool too
Thread
Thread Starter
Forum
Replies
Last Post
