2nd Gen General Discussion The place for non-technical discussion about 2nd Gen RX-7s or if there's no better place for your topic

Another crank and no start

Thread Tools
 
Search this Thread
 
Old Aug 28, 2018 | 02:46 PM
  #1  
Anewman1798's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2016
Posts: 21
Likes: 0
From: Missouri
Another crank and no start

So I recently replaced fuel pump since the car want getting fuel. There's noise of fuel pump working and a gargle/burble sound, it does not start still, I am getting power to coil packs and have new plugs, battery .12v to fuel pump and coils still no start and I have 90psi compression. I've removed plugs and cranked it, mist of gas comes out, tried the plugs and got no spark, i do think ive done that wrong since I just had the threads grounded,i don't know what to try next .Any help is appreciated.

Last edited by Anewman1798; Aug 28, 2018 at 08:11 PM. Reason: Forgot details
Reply
Old Jul 3, 2020 | 03:27 PM
  #2  
GokuGaming 95's Avatar
Full Member
 
Joined: May 2020
Posts: 57
Likes: 0
From: United States
Originally Posted by Anewman1798
So I recently replaced fuel pump since the car want getting fuel. There's noise of fuel pump working and a gargle/burble sound, it does not start still, I am getting power to coil packs and have new plugs, battery .12v to fuel pump and coils still no start and I have 90psi compression. I've removed plugs and cranked it, mist of gas comes out, tried the plugs and got no spark, i do think ive done that wrong since I just had the threads grounded,i don't know what to try next .Any help is appreciated.
is your intake installed correctly?
The three main things an engine need is
1.air
2.fuel
​​​​​​3.spark
if it has all these i would suggest checking your belts.
Reply
Old Jul 3, 2020 | 03:57 PM
  #3  
Rotary Alkymist's Avatar
My mom lets me redline
Tenured Member: 10 Years
Community Favorite
 
Joined: Oct 2011
Posts: 600
Likes: 132
From: Cornwall, ON
Check all of your fuses. Check EGI PAL fuse under the hood. Check 15A engine fuse inside the car.
Reply
Old Jul 4, 2020 | 03:00 PM
  #4  
Anewman1798's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2016
Posts: 21
Likes: 0
From: Missouri
I did do that. Thanks for the help. Swapped out my coils with igniters and turned over. Few months later motor locked. Thank you all for your help. Much appreciated, now we’re on to stupid big turbos and ports 👍
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BTNH-LC
2nd Gen General Discussion
13
Oct 26, 2019 11:21 AM
Kai Kraft
Build Threads
6
Oct 15, 2018 06:51 PM
fcs3l0ve
New Member RX-7 Technical
6
May 10, 2009 02:42 PM
A'PEXi 7
2nd Generation Specific (1986-1992)
2
Jan 2, 2004 10:53 AM
NiceOrNot
3rd Generation Specific (1993-2002)
4
Nov 22, 2001 09:46 PM




All times are GMT -5. The time now is 10:15 AM.