Another 20b singel turbo choice question
#1
3-Rotor madness
Thread Starter
Another 20b singel turbo choice question
It might have been covered before but im gonna be a bit more specific in terms of what i am looking for!
I am looking for a turbo capable of 600rwhp but will use it on around 500, i will do mainly time attack but some street use will occure aswell as some rare drag races.
The turbo must be a BB one since spool and response in nr1 prio!
The turbo must be rather compact to maybe pass emissions and it can not be ratet for more then 600rwhp (on a rotary!!!) since timeattack regulations says so for me
It must be a t4 undivided or tial exhaust housing
The turbo must be as free flowing as possible as heat and backpreassure is a bad for a track car :-)
I know that i have to compromise but please help me find the best turbo for me..... my local turbo builder suggested gtx40r of some sort but im not sure they are rotary oriented enough :-/
I am looking for a turbo capable of 600rwhp but will use it on around 500, i will do mainly time attack but some street use will occure aswell as some rare drag races.
The turbo must be a BB one since spool and response in nr1 prio!
The turbo must be rather compact to maybe pass emissions and it can not be ratet for more then 600rwhp (on a rotary!!!) since timeattack regulations says so for me
It must be a t4 undivided or tial exhaust housing
The turbo must be as free flowing as possible as heat and backpreassure is a bad for a track car :-)
I know that i have to compromise but please help me find the best turbo for me..... my local turbo builder suggested gtx40r of some sort but im not sure they are rotary oriented enough :-/
#2
CC of L-Squared Shots
I'm not sure what you mean rotary oriented enough outside of maybe the stock turbos? They came with a rotary so I guess that's about as rotary oriented as you get.
You could always get yourself a slightly larger turbo size and perhaps adjust your A/R to give you better response.
GT40 series are good in size, you may also consider the S366 or S400 too.
You could always get yourself a slightly larger turbo size and perhaps adjust your A/R to give you better response.
GT40 series are good in size, you may also consider the S366 or S400 too.
#4
EGTs of Doom
iTrader: (13)
BorgWaner EFR8374. Should be sized perfectly and you will not find a quicker spool at that power level with the dual ball bearing Gamma TI turbine wheel mated to a billet compressor.
Performance Turbos | BorgWarner Turbo Systems
Performance Turbos | BorgWarner Turbo Systems
#5
3-Rotor madness
Thread Starter
yeah but its t4 divided... that manifold is gonna suck to fabricate and to get right, and aldo aint the turbine a bit small?
guess it has to be a gtx4094 or 4088r
guess it has to be a gtx4094 or 4088r
Trending Topics
#8
CC of L-Squared Shots
Thread
Thread Starter
Forum
Replies
Last Post