Would anyone happen to know the size of the banjo bolt for the fuel inlet and outlet
Thread Starter
Breaker of bolts
Joined: Oct 2013
Posts: 14
Likes: 0
From: Texas
Would anyone happen to know the size of the banjo bolt for the fuel inlet and outlet
I lost one of the banjos bolts for my nikki carb and cant find a replace meant 
I hope jegs makes a bolt of the same size..I just dont know its dimensions..
I hope jegs makes a bolt of the same size..I just dont know its dimensions..
Joined: Jun 2008
Posts: 8,376
Likes: 28
From: Chino Hills, CA
I pulled one off a spare carb cover and measured for you: This is one of the two banjo bolts that sit atop the needles.
Wrench size is 14mm
Length is 26mm overall; 21mm "working" length
Thread diameter is 10mm; thread pitch is 1.0mm
Threaded section length is 11.5mm
Bore is 4mm
Wrench size is 14mm
Length is 26mm overall; 21mm "working" length
Thread diameter is 10mm; thread pitch is 1.0mm
Threaded section length is 11.5mm
Bore is 4mm
Thread Starter
Breaker of bolts
Joined: Oct 2013
Posts: 14
Likes: 0
From: Texas
I pulled one off a spare carb cover and measured for you: This is one of the two banjo bolts that sit atop the needles.
Wrench size is 14mm
Length is 26mm overall; 21mm "working" length
Thread diameter is 10mm; thread pitch is 1.0mm
Threaded section length is 11.5mm
Bore is 4mm
Wrench size is 14mm
Length is 26mm overall; 21mm "working" length
Thread diameter is 10mm; thread pitch is 1.0mm
Threaded section length is 11.5mm
Bore is 4mm
Now to find a replacement or call a machine shop and order a few..
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM
