Would anyone happen to know the size of the banjo bolt for the fuel inlet and outlet
#1
Breaker of bolts
Thread Starter
Would anyone happen to know the size of the banjo bolt for the fuel inlet and outlet
I lost one of the banjos bolts for my nikki carb and cant find a replace meant I hope jegs makes a bolt of the same size..I just dont know its dimensions..
#3
1st-Class Engine Janitor
iTrader: (15)
I pulled one off a spare carb cover and measured for you: This is one of the two banjo bolts that sit atop the needles.
Wrench size is 14mm
Length is 26mm overall; 21mm "working" length
Thread diameter is 10mm; thread pitch is 1.0mm
Threaded section length is 11.5mm
Bore is 4mm
Wrench size is 14mm
Length is 26mm overall; 21mm "working" length
Thread diameter is 10mm; thread pitch is 1.0mm
Threaded section length is 11.5mm
Bore is 4mm
#4
Breaker of bolts
Thread Starter
I pulled one off a spare carb cover and measured for you: This is one of the two banjo bolts that sit atop the needles.
Wrench size is 14mm
Length is 26mm overall; 21mm "working" length
Thread diameter is 10mm; thread pitch is 1.0mm
Threaded section length is 11.5mm
Bore is 4mm
Wrench size is 14mm
Length is 26mm overall; 21mm "working" length
Thread diameter is 10mm; thread pitch is 1.0mm
Threaded section length is 11.5mm
Bore is 4mm
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM