window problem
#1
Junior Member
Thread Starter
Join Date: Mar 2002
Location: Edmonton Alberta
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
window problem
for whatever reason my windows(both or them) come off the track when I try to roll them down.......I know I'm not the first one to have this problem.......anyone know how to fix it?
#4
Check your window channel. Goes around the door for the glass and also down some into the door. Where your front adjustment is. Mine does the same but the channel had been cut where it should go down into the door.
#5
Junior Member
Thread Starter
Join Date: Mar 2002
Location: Edmonton Alberta
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
yeah I did that, but it almost seems like the window is too small for the channels it just slides about 1/2 an inch between the two channels. I took the entire door apart and I still cant figure it out
#6
I have not replaced my channels yet but i hate to buy regulators to find out its not that. Drivers door is the worst. Roll the window down and if it don't go off track it ends up tipping forward. So when you roll it back up you have to grab the glass and shift it to the rear. Tryed all adjustments nothing helped. Did not need it much in the winter but summer is different.
#7
Rotary Freak
Originally posted by crankit
Check your window channel. Goes around the door for the glass and also down some into the door. Where your front adjustment is. Mine does the same but the channel had been cut where it should go down into the door.
Check your window channel. Goes around the door for the glass and also down some into the door. Where your front adjustment is. Mine does the same but the channel had been cut where it should go down into the door.
hope to get a couple new channels this week,
that **** is anoying
Trending Topics
#8
Rotary Freak
Originally posted by firstRX-7
yeah I did that, but it almost seems like the window is too small for the channels it just slides about 1/2 an inch between the two channels. I took the entire door apart and I still cant figure it out
yeah I did that, but it almost seems like the window is too small for the channels it just slides about 1/2 an inch between the two channels. I took the entire door apart and I still cant figure it out
i bet their all on the driver side also
mine is on all three 1st gens ive owned
Thread
Thread Starter
Forum
Replies
Last Post