Rotary7s

Tire you can put on your 7?

I been thinking to go 16,But I dont like to low profile of a sidewall. I had 215/45/16 before I bougth for my FB then never used them.

I talked to my wheel specialist the other day he said I can go up to 225/40/17

I was in a rush to get infoI hope he didnt give me that info for a FC...

So on a 7 in wide wheel,whats the widest tire you guys have seen WITHOUT rubbing,Since my car is apart,I willbe rolling the fenders soon,

Show me some pics of lowered 7s with 16 or 17 n wheels,and do you tink 7.5 wide will fit?

J Oliver

I had a 225 45 16 and it rubbed slightly. My car is quite low though. I now have 225 40 16 Yokohama A520's and there is no probs.

Rotary7s

Is this on a first gen..and do you have pics?

buddah9543

i ran 225/45/16 in the rear and it rubs on the rear passenger side. So i m moving the 215/40/16 in the front that i have already to the rear and putting 205/40/16 in the front. But 215 were fine in the front. 225/40/16 will work u just might have to pull the fenders.

mar3

iTrader: (8)

Did you roll the inner fender lip, though? I rubbed with 225/50/15sin back on all the RX-7s I've had so far and each time a little banging in the area solved the problem....

Rotary7s

So it looks like 215/40 or 215 /45 would be safe..

buddah9543

i just put 215/40/16 in rear and 205/40/16 in front. Perfect fit!

Rotary7s

Does anyone have pics?

Phiber Optik

iTrader: (2)

I have 16x7.5 momo wheels and I run 205-40-16 front and 225-40-16 rear without any rubbing at all (including extreme driving) and I have NOT rolled the inner fender lips

With the 7.5" wide wheel, it comes really close to touching the bottom spring coil in the front. But all said and done it works perfectly without touching

I wouldn't suggest a 7.5" wide wheel in the front unless you run a 215 or higher width, because with a 205 the tire is somewhat stretched to the width of the rim, it's very minor, but noticable on close inspection

what do you want pics of?

Rotary7s

Of a 7 lowered..about 1 in or so with 215/or 225..either 16 or 17 in ..

Just to see how it looks "tucked" and wonder if it will rub,..

AJC13B

225/45/17 on 17x8 rims on the rear and 205/40/17 on 17x7 on the front

I got a bit of room, Im going to try for 245s under there soon....

Rotary7s

Did you roll the lip in the rear?
Whats the offset..