Paul123

Hey guys I'm new to this forum and I would like to ask a question. I have a 1982 RX7 completly stock. I just bought the car form the original owner and the only problem was that it had been sitting for 5 years. My father and I rebuilt the carbs and put them back in and we finaly got the car to start. When we got it to start it was idling at 4000 and higher I cant seem to find any vacume leaks and i was concerned about letting the car run for to long at such a high rpm. If anyone could point me in the right direction please.
thanks in advance
Paul

TheDriver216

iTrader: (2)

heres a start https://www.rx7club.com/1st-generation-specific-1979-1985-18/how-do-i-tune-nikki-683133/

bugman1973

i bet something on the carb is getting stuck ive had that problem before

MosesX605

Sounds like the throttle stop screw isn't set correctly. Even a fairly slight adjustment can go a long way to getting that idle speed down to where it should be.

85 FB

Check out the FSM for your car. It should also help.

http://www.wankel.net/~krwright/cars/rx7/manuals.html

BTW, having your car idle at 4K won't hurt it, just burn up a lot of fuel. These cars' redline start at 7K.

Paul123

thanks for the advice the secondaries had gotten stuck open just a little. Now I just have to play with it till I get the right settings. At the moment I'm concerned that the oil metering pump isn't working, because their is no oil in the lines on the carb or anywhere else I can see. Im about to do a search to see if I can find anything.