used headers....for 12a
#1
Senior Member
Thread Starter
Join Date: Nov 2002
Location: Nanaimo, B.C
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
used headers....for 12a
, i was just curious if anyone had used headers that they need to get rid off for a not bad price... or new anyone? im doing my exhaust and running very tight on my budget.... thanks this is for a 12a just so theres no confusion...
#4
If you still need one, my friend has one that he wants to get rid of. The header is an old rotary engineering one. Its black and basically identical to the racing beat ones, jut a different engine to header flange. Used but basically in good condition. It been partially sand blasted to strip the old paint. $50 + shipping. e mail me if you want it. Jaloy@tscnet.com
CJG
CJG
#6
damn hippies
Join Date: Feb 2002
Location: Syracuse NY/Houston texas
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
RXMacSeven...what kinda shape are they in? i got a hks titanium muffler for 80 bucks also what kinda connetion does the glaspack have on it?
Stepdaddy
Stepdaddy
#7
Senior Member
Thread Starter
Join Date: Nov 2002
Location: Nanaimo, B.C
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SoRRoW
RacingBeat
Road Race Header 79-85
RX-7 (12A)
Part Number: 16125
Retail Price: $134.00
RacingBeat
Road Race Header 79-85
RX-7 (12A)
Part Number: 16125
Retail Price: $134.00
i was told that this was uncollected, whats the difference ? what is collected and uncollected?
Trending Topics
#8
Banned. I got OWNED!!!
collected is where the 2 pipes are collected into 1 pipe .... this setup is usally used on street cars...... the uncollected header is 2 pipes that are run split(usally to the back of the car)this setup is usally used on streetport , bridgeport or if you want optinum power output
#11
Junior Member
Join Date: Feb 2002
Location: White Rock, B.C.
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
I'll try & get a photo of it & post it tomorrow on here if I can figure out how. If interested, you're just across the water. If you sent a PM the forum would tell me, wouldn't it?
#13
MY NEW NAME IS ROTARY 7S
Join Date: Jun 2002
Location: Cell Block 4 (LOCKDOWN)
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I wasnt sure what you going to do with the rest of your exhast,
The road race header comes out with a sqaure flange,and it does not goin from 2/1 it stays 2/2,
What I did was had my exhast guy make a "y"about 15-18 in long.Then go into 1 2 1/2 in pipe.To my inline non fiberglassed racing muffler ,back over the axle to my other muffler.
I have no emisisons and no inspections.
Yes it shoot flames,so tailgaters beware..
The road race header comes out with a sqaure flange,and it does not goin from 2/1 it stays 2/2,
What I did was had my exhast guy make a "y"about 15-18 in long.Then go into 1 2 1/2 in pipe.To my inline non fiberglassed racing muffler ,back over the axle to my other muffler.
I have no emisisons and no inspections.
Yes it shoot flames,so tailgaters beware..
#14
Full Member
Join Date: Oct 2002
Location: Northern, KY
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
I have a new PACESETTER HEADER KIT for $80.00 + shipping and would send you a lebra with it. If you are interested send me a email to esoto66@hotmail.com
#15
8/1 Building/Drive Ratio
iTrader: (1)
i have a full exhaust and fuel pump and reg to go with it for sale.
Road race header
dual presilencer centersection
N1 rear section
great sound, only about 5000 miles on the system
450+ shipping
I got a huge gain from this and had not yet rejetted the carb.
PM me
Road race header
dual presilencer centersection
N1 rear section
great sound, only about 5000 miles on the system
450+ shipping
I got a huge gain from this and had not yet rejetted the carb.
PM me
#18
Senior Member
Thread Starter
Join Date: Nov 2002
Location: Nanaimo, B.C
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
wow got alot more responses than i thought, 450 $ american is a little to much for me , sounds like a great system, if i had more money and wasnt a poor 16 year old i would most likely buy that off ya 82streetracer.
#19
Full Member
Join Date: Nov 2002
Location: Overland Park, KS
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Hey 82streetracer,
I am interested in your "full exhaust and fuel pump and reg to go with it" for sale. I have an 85 GS, with stock exhaust (no cats). Is this the Racing Beat setup? I am hoping a Road Race Header would work with my regular setup (basic 12A - no mods). What is an N1 rear section? Are they black or chrome? Please tell me more about the fuel pump and the reg.
Thanks,
Merry Christmas!
Joe W.
I am interested in your "full exhaust and fuel pump and reg to go with it" for sale. I have an 85 GS, with stock exhaust (no cats). Is this the Racing Beat setup? I am hoping a Road Race Header would work with my regular setup (basic 12A - no mods). What is an N1 rear section? Are they black or chrome? Please tell me more about the fuel pump and the reg.
Thanks,
Merry Christmas!
Joe W.
Thread
Thread Starter
Forum
Replies
Last Post