update:...
#53
Banned. I got OWNED!!!
Thread Starter
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
you mean like the hard line possibly being kinked? i'm about to get under it now. i can't move too fast because i pulled a muscle in my neck going down thru my shoulder blade and it hurts like hell. but it won't STOP ME !!! MUHUAHAHAHAAAAAAA
#54
Always waiting for parts!
iTrader: (2)
Originally Posted by FB II
you mean like the hard line possibly being kinked? i'm about to get under it now. i can't move too fast because i pulled a muscle in my neck going down thru my shoulder blade and it hurts like hell. but it won't STOP ME !!! MUHUAHAHAHAAAAAAA
#55
Banned. I got OWNED!!!
Thread Starter
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
OK UPDATE TIME! hahahaha, i pulled the rubber hose going to the gas tank from the metal part of the return line. i got a different hose and ran it to a jug. turned the fuel pump on. it held 2psi for a few seconds then went to around 4psi and held strong at that. so uhhhh???
#56
Always waiting for parts!
iTrader: (2)
Originally Posted by FB II
OK UPDATE TIME! hahahaha, i pulled the rubber hose going to the gas tank from the metal part of the return line. i got a different hose and ran it to a jug. turned the fuel pump on. it held 2psi for a few seconds then went to around 4psi and held strong at that. so uhhhh???
If worst come to worst Ill give you 50.00 to take all the agravasion from you j/k
I got an update on my parts. My Military friend picked them up from my japanese friend. So hopefully I will be playing with my car next week and not starting a thread like this of my own
#58
Banned. I got OWNED!!!
Thread Starter
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
yea, i'm gonna run some wire thru there now and then blow another 120psi thru it as well. thanks for your ideas. lets see if one or if not both win the game here! i will update in about 20 minutes or so. hahahaha
p.s. GOOD to hear about your parts. soon enough we just may have 2 more turbo fb's running on this damn site! WOOOOOOO!
p.s. GOOD to hear about your parts. soon enough we just may have 2 more turbo fb's running on this damn site! WOOOOOOO!
#60
Banned. I got OWNED!!!
Thread Starter
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
ok, no go. wally has nothing. hmmm. i'm gonna figure something out in the morning. give me more ideas guys! hahahahaha i think i could get this on the road tomorrow!
#61
Nikki-Modder Rex-Rodder
Join Date: Feb 2001
Location: Trying to convince some clown not to put a Holley 600 on his 12a.
Posts: 2,890
Likes: 0
Received 14 Likes
on
6 Posts
Got wire coat hangers?
You'll need a couple. They are a bit still, though, so in order to make the steel a bit softer so it doesn't bind so easily in the tube, take out the propane torch. Coil the lengths of wire up in a tight ball and heat them up to a dull cherry red. let them sit and cool slowly. You'll want to clean them with steel wool once you sraighten them.
Seems like alot of work...But it s'all I got.
You'll need a couple. They are a bit still, though, so in order to make the steel a bit softer so it doesn't bind so easily in the tube, take out the propane torch. Coil the lengths of wire up in a tight ball and heat them up to a dull cherry red. let them sit and cool slowly. You'll want to clean them with steel wool once you sraighten them.
Seems like alot of work...But it s'all I got.
#63
Whack 'em and stack 'em
Join Date: Mar 2003
Location: Clarksburg/Bridgeport WV- North Central Appalachia
Posts: 1,373
Likes: 0
Received 0 Likes
on
0 Posts
Liquid plumber?
(How hard is it to take off the whole line? And what would block it anyway? I mean- would'nt there have to be some garbage flowing through the whole fuel system to really block it up like that? Just curious..)
(How hard is it to take off the whole line? And what would block it anyway? I mean- would'nt there have to be some garbage flowing through the whole fuel system to really block it up like that? Just curious..)
#67
Lean Mean Speed Thingie
Join Date: Mar 2002
Location: Moscow, ID
Posts: 1,102
Likes: 0
Received 0 Likes
on
0 Posts
they have things for running wire through conduit that you can pick up at hardware stores, its a flexible, somewhat thick wire that you can use to push or pull stuff through, id attach something to the end of it to pull or push crap out of there,
the wire comes on a roll, you can roll it back up when you're done and everything, should work fine, its made for pulling wire i think
the wire comes on a roll, you can roll it back up when you're done and everything, should work fine, its made for pulling wire i think
#68
Banned. I got OWNED!!!
Thread Starter
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
ok guys, i'm going to lowes now and grabbing some good wire to use. i do have wire coat hangars, but i'm out of gas for the torch. :/ hahahaha i'll let you know what happens. although, like TOM said, i wonder if there is a liquid i could use to dump in there that would help break up what's inside that vein or maybei could feed my car some cheerios hahahaha. i'll update in a bit! WISH ME LUCK!
#70
1983 GSL, 1987 323 "GX"
Join Date: Jun 2004
Location: Las Cruces, NM
Posts: 2,265
Likes: 0
Received 0 Likes
on
0 Posts
Got wire coat hangers?
You'll need a couple. They are a bit still, though, so in order to make the steel a bit softer so it doesn't bind so easily in the tube, take out the propane torch. Coil the lengths of wire up in a tight ball and heat them up to a dull cherry red. let them sit and cool slowly. You'll want to clean them with steel wool once you sraighten them.
Seems like alot of work...But it s'all I got.
Sterling, that's what I do to make lockpicks. File it down, bend it, torch it, douse it in cold water.
Um, er, yah.
You'll need a couple. They are a bit still, though, so in order to make the steel a bit softer so it doesn't bind so easily in the tube, take out the propane torch. Coil the lengths of wire up in a tight ball and heat them up to a dull cherry red. let them sit and cool slowly. You'll want to clean them with steel wool once you sraighten them.
Seems like alot of work...But it s'all I got.
Sterling, that's what I do to make lockpicks. File it down, bend it, torch it, douse it in cold water.
Um, er, yah.
#71
Banned. I got OWNED!!!
Thread Starter
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
ok, there is a serious clot in there i think. i tried pushing all kinds of different wires down there and they all get stuck at the same point. probably 10" thru the tube. still up where the firewall is. ugh. i have had no luck blasting it out either. i guess i'm going to get regular fuel line to replace it for now because my dad has alot of it i can use. Carl, if you do find that AL fuel line, let me know OFF TO THE DADS HOUSE!
i'll be back with another update. thanks for the support guys, it really does help me when i come back here and see all the interest!!! makes me more motivated every time. WOOOOOOOO!!!!!!! atleast i AM making SOME progress. better than none!
i'll be back with another update. thanks for the support guys, it really does help me when i come back here and see all the interest!!! makes me more motivated every time. WOOOOOOOO!!!!!!! atleast i AM making SOME progress. better than none!