Thermal Reactor to Cat
#1
Senior Member
Thread Starter
Thermal Reactor to Cat
I am restoring an SA22 I bought new. My intent is to make it as close to original as I can. But I live in CO which requires emission checks and I'd like to improve the gas mileage for daily driving.
My understanding is that the TR cars have to run very rich which kills the mileage. Will replacing the TR with a CAT allow me to lean out the carb for better mileage while still passing emissions for the year.
(I know I'm not supposed to alter the original emissions system but the idiots at the emissions station won't know the difference.)
Herb
My understanding is that the TR cars have to run very rich which kills the mileage. Will replacing the TR with a CAT allow me to lean out the carb for better mileage while still passing emissions for the year.
(I know I'm not supposed to alter the original emissions system but the idiots at the emissions station won't know the difference.)
Herb
#3
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,950
Received 2,680 Likes
on
1,896 Posts
i've had both systems, and for me the SA actually got slightly better mileage than the FB cars did. not really sure why, although the gas we have now is leaner than the gas we had when these things were new.
the second, and more important part, is that the air injection system is different between the two cars. some how you would need to plum the air pump air into the exhaust ports, Mazda used a passage in the engine...
the second, and more important part, is that the air injection system is different between the two cars. some how you would need to plum the air pump air into the exhaust ports, Mazda used a passage in the engine...
#5
Waffles - hmmm good
iTrader: (1)
Is your thermal reactor cracked or damaged? If not just use it and make sure the smog stuff is
setup right. The SA (80s for sure) has special logic builtin to the ignition to disable the rear rotor
and/or richen/lean the mixture based on speed/temp/vacuum. It all works well when its
maintained.
setup right. The SA (80s for sure) has special logic builtin to the ignition to disable the rear rotor
and/or richen/lean the mixture based on speed/temp/vacuum. It all works well when its
maintained.
#6
Senior Member
Thread Starter
Is your thermal reactor cracked or damaged? If not just use it and make sure the smog stuff is
setup right. The SA (80s for sure) has special logic builtin to the ignition to disable the rear rotor
and/or richen/lean the mixture based on speed/temp/vacuum. It all works well when its
maintained.
setup right. The SA (80s for sure) has special logic builtin to the ignition to disable the rear rotor
and/or richen/lean the mixture based on speed/temp/vacuum. It all works well when its
maintained.
Herb
Trending Topics
#9
Waffles - hmmm good
iTrader: (1)
The FSM gives you all the details about how to maintain, test, and tune the setup for the factory
specs. If you have ahd it from new, you may just need to clean things and replace leaking vacuum lines and be good to go. Likely not many adjustments needed.
specs. If you have ahd it from new, you may just need to clean things and replace leaking vacuum lines and be good to go. Likely not many adjustments needed.
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
06-03-24 03:25 PM