1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Steering column

Thread Tools
 
Search this Thread
 
Old Jul 1, 2018 | 08:39 PM
  #1  
Shortcircut05's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2018
Posts: 5
Likes: 0
From: Nor cal
Steering column

Ok guys brand new front end new gear box still have play in the steering wheel possibly looking to find a new column its an 85 and im not sure where to find parts can anyone help
Reply
Old Jul 2, 2018 | 02:58 AM
  #2  
7aull's Avatar
RX HVN
Tenured Member 15 Years
iTrader: (2)
 
Joined: Jan 2003
Posts: 3,889
Likes: 229
From: Arizona
I'd be surprised if new pieces are available, if that is the question? Pull up a PN and ask your Dealer. You have a NEW gearbox? Won't find anything "tighter" than that....
These are adjustable, in that there is a screw/nut that can be adjusted externally to put drag on the underlying ***'y. BUT if you over-do it this will shorten the life of the pieces and you will be back where you started. These boxes, as you are discovering, have a fair bit of center-play by design...

Stu Aull
80GS
AZ
Reply
Old Jul 2, 2018 | 12:01 PM
  #3  
peejay's Avatar
Old [Sch|F]ool
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: May 2001
Posts: 12,856
Likes: 568
From: Cleveland, Ohio, USA
The steering column is part of the box...
Reply
Old Jul 2, 2018 | 12:31 PM
  #4  
Ckforker's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
Liked
Loved
Community Favorite
 
Joined: Mar 2014
Posts: 801
Likes: 125
From: Cape Charles, VA
You mentioned new suspension, did you replace the pitman arm?
Reply
Old Jul 3, 2018 | 10:44 AM
  #5  
Kevin Crawford's Avatar
Full Member
 
Joined: Sep 2017
Posts: 80
Likes: 1
From: Deltona, Flordia
I have had this issue as well for a while. I put a set of new control arms on my car being as the ball joints/rubber were shot in mine. I also did a steering box brace reinforcement. I checked my pitman arm and it is practically brand new. I wish someone would offer a aftermarket solution for a improve steering feel on these cars.
Reply
Old Jul 3, 2018 | 12:24 PM
  #6  
GSLSEforme's Avatar
ancient wizard...
Tenured Member 05 Years
 
Joined: Sep 2014
Posts: 2,335
Likes: 262
From: Maryland
Originally Posted by Kevin Crawford
I have had this issue as well for a while. I put a set of new control arms on my car being as the ball joints/rubber were shot in mine. I also did a steering box brace reinforcement. I checked my pitman arm and it is practically brand new. I wish someone would offer a aftermarket solution for a improve steering feel on these cars.
If you've not done so,upgrade idler arm to Moog K9369 for better steering response.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Enzo R!
2nd Generation Specific (1986-1992)
5
Dec 28, 2008 09:12 PM
antiSUV
3rd Generation Specific (1993-2002)
1
Apr 12, 2008 01:44 PM
Redwood
1st Generation Specific (1979-1985)
1
Feb 9, 2003 12:09 AM




All times are GMT -5. The time now is 10:11 AM.