Spindle Search
#2
Redline Addict
iTrader: (1)
Join Date: Jan 2006
Location: Aragon, GA
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
They didn't make the TII in 84 or 85, so I suppose you are looking for spindles that will allow you to do the TII brake upgrade, which, correct me if I am wrong, should be any 84-85 spindles. In which case you need to get the strut tubes from said cars, as the spindles are attached.
#3
Full Member
Join Date: May 2005
Location: Windsor, Ontario
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
So if I understand correctly, Since the 5-lug s5 spindles are a direct swap into my s4 4-lug chassis, then you're saying I can swap the same s5 spindles into my 1885 GSL, provided I have the strut tubes to complete the mounting?
#4
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Virginia
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
You are right 82 Rex. I am duing the TII swap so I need the 84-85 spindles so anybody got some. Mazda dosn't carry them anymore and autozone and napa don't have them.
#5
Banned. I got OWNED!!!
iTrader: (3)
Originally Posted by firestarter810
So if I understand correctly, Since the 5-lug s5 spindles are a direct swap into my s4 4-lug chassis, then you're saying I can swap the same s5 spindles into my 1885 GSL, provided I have the strut tubes to complete the mounting?
along with a mounting kit.
-billy
#7
Lives on the Forum
iTrader: (13)
Originally Posted by racintang
You are right 82 Rex. I am duing the TII swap so I need the 84-85 spindles so anybody got some. Mazda dosn't carry them anymore and autozone and napa don't have them.
Trending Topics
#8
Too old to act my age
Join Date: Feb 2005
Location: Tulsa, Ok.
Posts: 3,164
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bwaits
along with a mounting kit.
-billy
-billy
RESpeed offers excellent quality parts, at reasonable prices, and has great customer service. I have been proud to reccomend his products and services to many forum members.
#9
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Virginia
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
As long as you know your being one. But I thought I had a first gen car and that this was a first gen forum. After all you do get better responces on first gen cars from first gen people.
#10
Burning Oil-Grinding 3rd
He means there is a First Gen Parts for sale Forum,
https://www.rx7club.com/1st-generation-rx-7-1979-1985-parts-101/
https://www.rx7club.com/1st-generation-rx-7-1979-1985-parts-101/
#12
Lives on the Forum
iTrader: (13)
http;//www.rx7club.com/showthread.php?t=622715
https://www.rx7club.com/1st-generation-specific-1979-1985-18/race-brake-kit-614953/
https://www.rx7club.com/1st-generation-specific-1979-1985-18/another-brake-upgrade-question-624875/
Wonder if you have asked this question before?
https://www.rx7club.com/1st-generation-specific-1979-1985-18/race-brake-kit-614953/
https://www.rx7club.com/1st-generation-specific-1979-1985-18/another-brake-upgrade-question-624875/
Wonder if you have asked this question before?
#13
Rockin' the suburbs!
Join Date: May 2006
Location: Dayton, Ohio
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by firestarter810
I can swap the same s5 spindles into my 1885 GSL, provided I have the strut tubes to complete the mounting?
#14
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Virginia
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Actually Rx7 Doctor if you actually read everything no I have not asked that question before. Try to read the top of the post before belittling. I ahve already got an offer for spindles from one of the gracious owners that read this thread.
#17
sellout
iTrader: (4)
Join Date: Jan 2005
Location: Lawrence KS
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
his initial post was just asking where to find them....
who cares if a thread is not in the right forum, its for the mods to decide if it gets moved anyways. people need to chill out for real.
who cares if a thread is not in the right forum, its for the mods to decide if it gets moved anyways. people need to chill out for real.
#18
Full Member
Join Date: May 2005
Location: Windsor, Ontario
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 84RX_Se7en
Yes. Then what you'll need to do is roll it up and hitch the horses to the buggy if you hope to go anywhere.
Are you trying to be clever there, or be a dick?
So the spindles I have, along with the mounting kit I have yet to purchase will make this work? Yes? No?
#19
Lives on the Forum
iTrader: (13)
Originally Posted by Midwest 7's
his initial post was just asking where to find them....
who cares if a thread is not in the right forum, its for the mods to decide if it gets moved anyways. people need to chill out for real.
who cares if a thread is not in the right forum, its for the mods to decide if it gets moved anyways. people need to chill out for real.
It's the same thing when someone comes on and thread jacks with a different topic. Or when someone comes on with a non-rotary related motor question.
Since I put alot of effort into helping in this section I feel I have the right to voice my opinion on this subject, and voice I shall continue to do.
#20
Rockin' the suburbs!
Join Date: May 2006
Location: Dayton, Ohio
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by firestarter810
Are you trying to be clever there, or be a dick?
So the spindles I have, along with the mounting kit I have yet to purchase will make this work? Yes? No?
So the spindles I have, along with the mounting kit I have yet to purchase will make this work? Yes? No?
#21
sellout
iTrader: (4)
Join Date: Jan 2005
Location: Lawrence KS
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx7doctor
. Look at how many of these happen per month. Then look at what it does to the search function with all those.
your just going to have to learn to live with it...
Originally Posted by rx7doctor
Since I put alot of effort into helping in this section I feel I have the right to voice my opinion on this subject, and voice I shall continue to do.
key word: help
#22
Lives on the Forum
iTrader: (13)
Originally Posted by Midwest 7's
and there is NOTHING you can do about it so quit giving people a hard time.
your just going to have to learn to live with it...
key word: help
your just going to have to learn to live with it...
key word: help
I will continue to address the issue at hand and that's how I will live with it. It is easy to go along with the flow of things to avoid creating waves. It takes someone with determination to change things for the better.
Now, if you have anymore to say on the subject then please Pm me because we are now cluttering the thread up.
#23
sellout
iTrader: (4)
Join Date: Jan 2005
Location: Lawrence KS
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx7doctor
When you start having the ability to do heavy diagnosis with members and spend hours at it then you can have an opinion on the subject.
I will continue to address the issue at hand and that's how I will live with it. It is easy to go along with the flow of things to avoid creating waves. It takes someone with determination to change things for the better.
Now, if you have anymore to say on the subject then please Pm me because we are now cluttering the thread up.
I will continue to address the issue at hand and that's how I will live with it. It is easy to go along with the flow of things to avoid creating waves. It takes someone with determination to change things for the better.
Now, if you have anymore to say on the subject then please Pm me because we are now cluttering the thread up.
the thread was ruined a long time ago, about the time you got it off subject about where to post.
trust me, i can have an opinion on the subject. granted i dont really care, (about what other people do/say on the internet), im just giving you a hard time for giving other people a hard time.
Thread
Thread Starter
Forum
Replies
Last Post