sleepy eyes
#1
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Cincinnati
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
sleepy eyes
is there any way you can do sleepy eyes without having to buy anything... i want my lights to look like 13 beefs.. im not sure how to do it and i dont want to break anything
#3
1979 RX-7 series1
Join Date: Oct 2007
Location: Adelaide, Australia
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
If you wana do it the proper way like my car, go to this thread man. In aus we call it 'lazy eyes'.
http://www.ausrotary.com/viewtopic.php?t=72556
You can do it all for round $10AUS. Not bad at all.
http://www.ausrotary.com/viewtopic.php?t=72556
You can do it all for round $10AUS. Not bad at all.
#5
Who wants to be pisst' on
Join Date: May 2007
Location: Bpt,Ct
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
All you need is a switch u can get one a radio shack or even an autozone not very expensive I just did this actualy not hard to do. here is the thread i used. https://www.rx7club.com/showthread.p...ht=sleepy+eyes
and u could have found a bunch of threads on this by searching. sleepy eyes or half way head lights or even layz eyes. its not hard to find.
and u could have found a bunch of threads on this by searching. sleepy eyes or half way head lights or even layz eyes. its not hard to find.
#6
1979 RX-7 series1
Join Date: Oct 2007
Location: Adelaide, Australia
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Don't know if ya noticed..... But my car has the 'sleepy' or 'lazy' eye's done to it...
Follow my link and you can't go wrong...
All the sleepy eye's is.... In simple terms... It's a kill switch linked to the 'power' wire from your switch that pops the lights up.. Turn kill switch on..(cut's power to the retractor switch) Turn 'on' your retractor button(which would normally pop up your lights, but because the kill switch is activated they don't) Then all you do is flick the kill switch off....(Lights re-act and start to pop up) Then you flick the kill switch back on so the lights stop in that spot...
Pretty simple man, not that hard.
Follow my link and you can't go wrong...
All the sleepy eye's is.... In simple terms... It's a kill switch linked to the 'power' wire from your switch that pops the lights up.. Turn kill switch on..(cut's power to the retractor switch) Turn 'on' your retractor button(which would normally pop up your lights, but because the kill switch is activated they don't) Then all you do is flick the kill switch off....(Lights re-act and start to pop up) Then you flick the kill switch back on so the lights stop in that spot...
Pretty simple man, not that hard.
Trending Topics
#10
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Cincinnati
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
sleepy eyes
<a href="http://photobucket.com" target="_blank"><img src="http://i94.photobucket.com/albums/l108/mtph/sleepy.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
i like this but how can i get it so that the way my lights are now i can raise them up to actually use the lights and make the position they are in now the down position
i like this but how can i get it so that the way my lights are now i can raise them up to actually use the lights and make the position they are in now the down position
#11
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Cincinnati
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
sleepy eyes
i like this but how can i get it so that the way my lights are now i can raise them up to actually use the lights and make the position they are in now the down position
#12
silver rx baby
Join Date: May 2007
Location: Bristol, TN
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
the **** wont let me move them, it just moves a little then spins then they just go up then down again. it say remove fuseable link 15, but i cant find it, is it the one under the steering wheel or the one under the hood?
#13
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Cincinnati
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
****
i unplugged the red and white wires next to the *****.. they are clipped together and then when they are unplugged you can adjust the **** and they go up and down..
Thread
Thread Starter
Forum
Replies
Last Post