I am finally able to post some pics and wanted to show Daddys Girls off. All three are sporting there Turbo's still tweaking the carb it sputters when you floor it but its running a lot better since I adjusted the float levels.

 

What kind of turbo kit is that if it is a kit if not would you show me where to get the stuff?

 

more pics!! of the 7

 

The specals are dust from buffing and polshing I am into detailing now with my Porter Cable

 

Those are Japanese coins some Lady's son at work, works in Japan and gave them to me they fit bettter then a quarter.

 

Is that turbo setup a drawthrough type?

 

got any more pics of that rear wing, i think i'm going to e putting something similar to that on mine

 

Yes it is a draw through I will take some more pictures of rear wing I am painting the laundry room right now. Not that naybody cares.

 

sweet engine bay ... where do you guys buy those big SS braided wires for the radiator hoses and such?

 

Looking good. We dont see many Draw through setups.

What is the badge on the dash in the passenger area?

 

Very nice, all of'em.

I've never seen a turbo setup quite like that 7 has.

=Eric

 

Draw through is an older way of doing it. Cause the fuel goes through the turbo. Eary GN's had the same style setup. it is not used much any more and I dont know of any present day kits that do it.

 

Hey thanks for the props, the stainless steel lines come from Summit Racing I am about 15 miles from the huge store in Akron (Talmage) all the crap is in stock the store is amazing. The small lines are actually sold as vacuum lines I use them for the oil feed line from the Banjo Bolt to the Turbo, pricy but cool. The badge on the dash came with the Limited Edition it says RX-7 you mailed back in to MAZDA and they ingraved it with your name then you stick it on the dash

 

What an Amazing 1st Gen RX7. You are very fortunate!

 

could I get a closer pic of the badge? My limited does not have one.

 

Outstanding!!!

That car is CLEAN AS CAN BE!!

Impressive - Now we need some Videos!!

 

love the wheels. what's the size and offset (if you know)???

 

wow wat kind of lip is that?

 

Very nice!

 

I've seen it in person... it kicks ***!

I was drawn to it because of its SA-ness.

Then I saw the gennie BAE turbo setup, talk about your old-school cool!

 

The Rims are RONAL I bought them from some guy at Dealer Tire he had them sitting on a shelf in the back building they need a litlle work though. I just know that are 14 inch I have DUNLOP P195/50R15 on them. I also have the orginal spte tire it has never been taken out of the car I just put air in last month. hey woodonastick what do you mean by lip the front air dam?

 

Clean! Looks good!

 

Very sweet car.

A suggestion: Blackening the inner wells will really make it look good. Undercoat if needed and/or use rattle can. It makes it so much less visible, especially with your black car.

 

GRIMES I could not agree more that is my next project I am going to pull the wheels off and install the speed bleeders I have purchased and replace the brake fluid. I don’t know if anyone noticed how dark the brake fluid was it’s never been changed I have to get it done. Going to paint the drums and calipers to.

 

that is very impressive. I keep studying that carb pic. Is there a baffle between the charged side and the inlet side, inside the manifold? Is that also a nikki carb? Get it tuned and give us some 1/4 times, and no sand baggin that monster either.