xlversatilelx

i was just wondering what modifications everyone has, from engine, suspension, interior, or exterior??
me: racing beat springs, tokico blue shocks, steel braided brake lines, momo steering wheel and seat. thats about it

i plan on upgrading to a 13b street port with a weber 51ida carb, or i might just do a turbo II swap, still deciding

thorin

i have "speed holes" installed on multiple body panels.

RotorMotorDriver

iTrader: (1)

Its in the sig, plus Toyo tires, and thats about it, lol

~T.J.

Aico

I only got interior mods.

check my sig.

Ooh and I believe I got another mod from my previous owner. It's a little temp gauge on the dash right of the ignition-key.

It read the temp insde the car. Very handy if I may say so.

anthrax

Mine is bone stock for now, but I have a plan to add the Racing Beat Header, Presiclencer, and muffler, upgrade the intake and feul system. This is not going to hapen all at once, but the Exhaust is going to be changed this fall.

The Sterio is a substantial up grade.

Kenwood Excelon: Head, modular speakers in the rear, stadard speakers in the front, and two 10" subs, powered by a 450w Amp. I am going to add a four channel to run the speakers, and balance the power abit better.

There is also an Alpine Alarm with keyless entry and remote hatch release. This goes in tomarow

I guess some people would call thoes modifications

And the nice thing is with the exception of the alarm the car can go back to stock in the blink of an eye. I wired the sterio in such a way that if I wanted to I could reinstall the casette deck so I can show the car in stock trim if I so desiered or was ever asked to.

karism

Mines also in the sig,with 205/60/13 Rs260 Generals.
Other than that,not much yet.

Except ; a stuffed engine,waiting to be opened again

anthrax

Hey karism you got the Cheese port running?!

Thats great!! if you did

djmickyg

what the hell is a cheese port?? if seen im mentioned a few times now..

and for my mods..
engine : 2 1/2 inch headers, few carby tricks, port mached intake a few other little things but basicly what the minimun rotary has these days. so well call it stock
suspension: just lowered 1 inch all round with kings springs, i will do more later on if i i end up getting a certain engine i want but only if the guy can make up his mind if he wants it or not (but that another story)
inside: holden camera seats (they were free and i need seats at the time)
and just like Aico i have a little digital thermomiter..

nosajwrx-7

All is listed in the signiture.

Future stuff will be tri link rear w/ panhard bar, Racing Beat exhuast, rack and pinion steering, etc.

This is a very long term project.

Sudox_E

Suspension:
Tokico blue's
Eibach Springs
Poly bushings

Other than that, the engine is stock, I have plans for it, but hey, everyone has plans for their car

pillage6

Signature plus:

Momo Speedline Steering Wheel
Autometer Ultra-Lite:
Boost gauge
A/F meter
5" Rice tach
Oil pressure

Manual Boost Controller

Pioneer head unit
12" subwoofer and enclosure
Alpine Flex 4 amp

Cheesy $10 racing pedals
Cheesy Redline seat belt pads

15x7 ROH's
Yokohama ES100's
Tokico Blues
Clear lenses
4 point Strut Tower bar


That's about it for right now, future mods will be:
New intercooler set-up
Eibach springs
Electric fan

error402

'83 GSL - carter fuel pump, rb header, rb holley carb, holley bracket, holley fuel pressure gauge, custom straight pipe, new stereo, new black and yellow interior, 2nd gen oil cooler, 14'' wheels, z rated tires, no emissions equipment, o2 sensor, a/f gauge, etc..etc... I also have a 12a turbo kit that i haven't figured out what i am going to do. either im a going to install it or sell it.

-Error

anthrax

Hey Error what is the Holley Bracket you refered to?

Nice sig BTW. Source should be like throttle Wide Open

error402

It's a throttle bracket with some nice strong *** adjustable double return springs. I get nothing but a smoth pedal/throttle response with it.

Yes source should be like WOT.

-Error

poweRX-7

so far i only have:
RB header and presilencer
Custom 2.5" exhaust
magnaflow straight through muffler
carter fuel pump
holley fuel regulator
kandn (sorry)
custom stereo

soon to get:
tokiko illuminas all around
suspension tech, or rb springs all around
poly bushings
rack and pinion
15" wheels
new carb

when i have the time and money
streetported TII

FB II

in the sig as of now, but on the side being prepped for installation is large streetported 13b TII w/ holley injection

whoops! i forgot i changed my sig, here's what i have:

rb filter cover
rb header
striaght 2.25" exhaust
turbo II and tsudo high flow mufflers
tokico 5-way adjustable shocks
independent fan
no cats
no a/c
no emissions or rats nest

lays down 110rwhp. soon to lay down atleast 250rwhp!

Project84

My 84GS was used in a crash test experiment. Twice. I found out that one can strike a deer at 50mph and do an impressively small amount of damage to the car at the expense of the deers life. Damage to header panel, hood and headlight. Subsequently, I discovered that striking a deer at 75mph while decelerating from 115mph will yeild the same results as the first test, as long as you strike each deer while the are proceeding from the passenger side of the road to the driver side of the road and you contact the deer on the rear left hind quarter.
My 86 GXL is stock, including the slug-o-matic transmission, but everything works! Cruise, windows, all the power stuff works, so HA!!

xlversatilelx

haha yeah i have bullet holes on my hood hahah sweet

excitingleopard

[Off subject]---That's not really you in your avatar is it? please say no...

karism

Hey karism you got the Cheese port running?!

Not just yet,by next weekend,i`ll be tearing up the streets again!

what the hell is a cheese port??
Read the threads titled (no,i cant spell titled): J-bridge and Cheesport ,that will give you all the info you need.

xlversatilelx

haha why you dont like the hair, haha i only had it for a day jus for kicks so yeah

MIKE-P-28

iTrader: (1)

see sig for a slow *** money pit LOL