rebuild question
#1
Full Member
Thread Starter
rebuild question
So eye go through the forums like everyday just reading up random info cause eye love to know anything and everything there is to know, what’s all this eye read about being able to use 18 ga wire for the water jacket orings? I’m obviously not going that route with my build but does that actually work? Eye know there is a Mcmaster-Carr part number for them but eye don’t know them :/ rebuilding my 13b is it true that 12a and 13b use the same size water jacket o rings?
#7
Full Member
iTrader: (1)
Join Date: Dec 2015
Location: Mountain Home Idaho
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
So i'm trying to get my ducks in a row for if it comes down to it. I'm trying to buy the Mazdatrix rebuild dvd, but the site doesn't load for me. Anywhere else to grab a copy or get a download file sent to me? This is what i'm getting:
This page can’t be displayedTurn on TLS 1.0, TLS 1.1, and TLS 1.2 in Advanced settings and try connecting to https://www.mazdatrix.com again. If this error persists, it is possible that this site uses an unsupported protocol or cipher suite such as RC4 (link for the details), which is not considered secure. Please contact your site administrator.
Trending Topics
#8
Out In the Barn
iTrader: (9)
So i'm trying to get my ducks in a row for if it comes down to it. I'm trying to buy the Mazdatrix rebuild dvd, but the site doesn't load for me. Anywhere else to grab a copy or get a download file sent to me? This is what i'm getting:
This page can’t be displayedTurn on TLS 1.0, TLS 1.1, and TLS 1.2 in Advanced settings and try connecting to https://www.mazdatrix.com again. If this error persists, it is possible that this site uses an unsupported protocol or cipher suite such as RC4 (link for the details), which is not considered secure. Please contact your site administrator.
#9
Full Member
iTrader: (1)
Join Date: Dec 2015
Location: Mountain Home Idaho
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
It's a Gov. computer. I tried on my phone too, but it won't even load. Maybe I'll try my computer and see if that matters. These computers are pretty locked down in the desert.
#10
Old [Sch|F]ool
You can buy Viton O-ring cord from McMaster-Carr cheaper than 18 gauge wire, and it lasts a lot longer.
It's something like 10 feet of 2.4mm Viton for the inners and 12 feet of 2.0mm neoprene for the outers. Very cheap. Cheap enough that you should buy a bunch extra just in case you screw up somehow.
It's something like 10 feet of 2.4mm Viton for the inners and 12 feet of 2.0mm neoprene for the outers. Very cheap. Cheap enough that you should buy a bunch extra just in case you screw up somehow.
Thread
Thread Starter
Forum
Replies
Last Post
HDGib
New Member RX-7 Technical
15
07-07-13 04:38 AM
luism12lm
1st Generation Specific (1979-1985)
7
12-21-06 06:14 PM
82streetracer
1st Generation Specific (1979-1985)
12
03-28-02 06:24 PM