Rear cargo padding thickness
#1
Rear cargo padding thickness
I am remaking the rear cargo pad since its all tore up. I am using a sheet of 1/8" rubber (duro 60A) and the old mat as a template. How thick it the stock felt backing. Is it the thickness of how much the spare tire sticks up? Is it normal to see the hump of the spare tire in the carpet..
Rk.
Rk.
#2
Waffles - hmmm good
iTrader: (1)
The hump is visible normally. The thickness is about 1/2 in. of that padding and the pad does not go all the way to edge of the mat, stops about 3/4 in. in from the edges. Cant remember if its on the spare area or not. Will have to check and report back.
#4
www.AusRotary.com
When installed, there is no real spare wheel bump on mine, but our aussie delivered 84-85 models had a space saver spare tyre and so it sits very low in the spare wheel well.
#5
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,832
Received 2,603 Likes
on
1,847 Posts
i think its meant that the Jute should be thick enough so that it is flat around the spare. in practice its "flat" spare is usually visible to an extent
check out this one, https://bringatrailer.com/listing/19...rx-7-gsl-se-4/
extra points for listing the parts that fell off in the pics
check out this one, https://bringatrailer.com/listing/19...rx-7-gsl-se-4/
extra points for listing the parts that fell off in the pics
#6
www.AusRotary.com
i think its meant that the Jute should be thick enough so that it is flat around the spare. in practice its "flat" spare is usually visible to an extent
check out this one, https://bringatrailer.com/listing/19...rx-7-gsl-se-4/
extra points for listing the parts that fell off in the pics
check out this one, https://bringatrailer.com/listing/19...rx-7-gsl-se-4/
extra points for listing the parts that fell off in the pics
Trending Topics
#8
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,832
Received 2,603 Likes
on
1,847 Posts
i think the funny part is that they left those pictures in the ad. i would have put the screw back. someone was in a hurry. i don't know about where you are, but in the US every Rx8 ad seems to be as the gas station filling up...
Thread
Thread Starter
Forum
Replies
Last Post
HOZZMANRX7
1st Generation Specific (1979-1985)
15
08-26-07 01:21 PM
damian
3rd Generation Specific (1993-2002)
6
12-18-02 07:44 PM
JumpyRoo
2nd Generation Specific (1986-1992)
2
08-30-02 02:04 PM