Pauls 13B pix updated - flame video!
02-25-02, 06:31 PM
#1
Admitted Sevenaholic
Thread Starter
Join Date: Feb 2001
Location: Ashland, OH
Posts: 1,910
Likes: 0
Received 0 Likes
on
0 Posts
Pauls 13B pix updated - flame video!
More pix of PaulAber's 13B from an 86 conversion
and some video to!
Pix @ http://my7.rx-7.org/Paul/engine2-25-02.htm
Video @ http://my7.rx-7.org/Paul/video.htm
Enjoy the flames!
and some video to!
Pix @ http://my7.rx-7.org/Paul/engine2-25-02.htm
Video @ http://my7.rx-7.org/Paul/video.htm
Enjoy the flames!
02-25-02, 10:39 PM
#3
Old [Sch|F]ool
It sounds SWEET when he fires it up inside a garage though 
I had my back turned to the car, busy disassembling my engine, then they fire it up... kinda caught me off-guard
I had my back turned to the car, busy disassembling my engine, then they fire it up... kinda caught me off-guard
02-26-02, 03:55 AM
#7
Admitted Sevenaholic
Thread Starter
Join Date: Feb 2001
Location: Ashland, OH
Posts: 1,910
Likes: 0
Received 0 Likes
on
0 Posts
Paul has a full single RB Exhaust, header presilencer and primaflo. and sounds kinda funny bouncing off the concrete wall 
you need Apple's quicktime viewer as Windows Media Player won't play it correctly.
you need Apple's quicktime viewer as Windows Media Player won't play it correctly.
Trending Topics
02-27-02, 11:26 AM
#9
-SE with Mods
iTrader: (1)
Join Date: Jul 2001
Location: Ohio, Columbus
Posts: 562
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Directfreak
It is loud in the PC, I could only imagine in Real Life.
Sounds like the motor is VERY Responsive to the Throttle.
Either Lots of good power, or a light flywheel..
Either way, congratulations on a Job well done..
It is loud in the PC, I could only imagine in Real Life.
Sounds like the motor is VERY Responsive to the Throttle.
Either Lots of good power, or a light flywheel..
Either way, congratulations on a Job well done..
02-27-02, 02:07 PM
#10
Full Member
Join Date: Mar 2001
Location: vista ca
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
hey paul you have the pine apple racing sleeves installed, correct. Or if not when are you going too. the reason i ask is that a correctly sealed RB exhuast prima flow or not should not be Barfing flames. if you've got those sleeves though i could understand. anyhow the above is going off my exp, which is a rebuilt 13B with RB long primary + dynomax magnum race. i am still considering sealing the exhuast again with copper seal to quiet it down some more.
to any interested the large straight through muff at the end of Rb exhuast is loud.
to any interested the large straight through muff at the end of Rb exhuast is loud.
burn, baby, burn.
02-28-02, 06:46 AM
#12
-SE with Mods
iTrader: (1)
Join Date: Jul 2001
Location: Ohio, Columbus
Posts: 562
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by davo22
hey paul you have the pine apple racing sleeves installed, correct. Or if not when are you going too. the reason i ask is that a correctly sealed RB exhuast prima flow or not should not be Barfing flames. if you've got those sleeves though i could understand. anyhow the above is going off my exp, which is a rebuilt 13B with RB long primary + dynomax magnum race. i am still considering sealing the exhuast again with copper seal to quiet it down some more.
to any interested the large straight through muff at the end of Rb exhuast is loud.
hey paul you have the pine apple racing sleeves installed, correct. Or if not when are you going too. the reason i ask is that a correctly sealed RB exhuast prima flow or not should not be Barfing flames. if you've got those sleeves though i could understand. anyhow the above is going off my exp, which is a rebuilt 13B with RB long primary + dynomax magnum race. i am still considering sealing the exhuast again with copper seal to quiet it down some more.
to any interested the large straight through muff at the end of Rb exhuast is loud.
03-01-02, 04:13 AM
#14
Admitted Sevenaholic
Thread Starter
Join Date: Feb 2001
Location: Ashland, OH
Posts: 1,910
Likes: 0
Received 0 Likes
on
0 Posts
I suppose its more of kewl factor, like the top fuel dragsters spitting huge flames out the exhaust. Or the road racers that belch giant inferno's on decel around corners
03-01-02, 02:36 PM
#15
8krpm is not enough
Well my megasquirt got here the other day, and I'm getting geared up to put it together. We'll see if I can get the little -SE to puke flamage. I should prolly seal up the exhaust leaks first so I don't spew them under my feet
I think a nice ball of fire w/ a real strong backfire is about right for fueling on a rotary, means you're not leaning out
I think a nice ball of fire w/ a real strong backfire is about right for fueling on a rotary, means you're not leaning out
03-01-02, 04:58 PM
#18
Admitted Sevenaholic
Thread Starter
Join Date: Feb 2001
Location: Ashland, OH
Posts: 1,910
Likes: 0
Received 0 Likes
on
0 Posts
its like a Haltech F9 (Fuel only) computer. comes as a kit you assemble and can program via laptop.
I'm sure someone will have a link to it soon.
I too am curious how it will work on a rotary
I'm sure someone will have a link to it soon.
I too am curious how it will work on a rotary
Originally posted by V8kilr
wtf is a megasquirt?
wtf is a megasquirt?
Thread
Thread Starter
Forum
Replies
Last Post
Under PSI
3rd Generation Specific (1993-2002)
19
09-23-15 11:47 PM