Injector for SE
Rotary Enthusiast
Joined: Mar 2002
Posts: 822
Likes: 0
From: California
Full Member
Joined: Feb 2001
Posts: 99
Likes: 0
From: Las Vegas
hanman,
how about $100 for one injector, or $150 for 2 injectors?
both are out of a 1985 gsl-se
email me:
hancock@physics.unlv.edu
how about $100 for one injector, or $150 for 2 injectors?
both are out of a 1985 gsl-se
email me:
hancock@physics.unlv.edu
Last edited by hamster; Feb 19, 2003 at 12:15 AM.
Joined: Jul 2002
Posts: 7,301
Likes: 3
From: District of Columbia
I’ve got two stock ones sitting around.. I don't know if they are gsl-se or just regular second gen ones. Cause I recently got an engine we thought was a gsl-se but turned out to be a second gen with the gsl-se stuff on it I don't know if this included the injectors or not.. Are there any identifying marks or colors to differentiate between them?
Trending Topics
GSL-SE's are ORANGE top ones... heres a list:
84-85 13B NT low square center 680cc orange195500-0900
86-87 13B NT low square center 460cc red 195500-1350
86-87 13B T low square center 550cc tan 195500-1370
88 13B NT high square offset 460cc purple 195500-1350
88 13b T high square offset 550cc purple 195500-1370
89-91 13B NT high oval center 460cc red 195500-2010
89-91 13B T high oval center 550cc purple 195500-2020
84-85 13B NT low square center 680cc orange195500-0900
86-87 13B NT low square center 460cc red 195500-1350
86-87 13B T low square center 550cc tan 195500-1370
88 13B NT high square offset 460cc purple 195500-1350
88 13b T high square offset 550cc purple 195500-1370
89-91 13B NT high oval center 460cc red 195500-2010
89-91 13B T high oval center 550cc purple 195500-2020
84SE-EGI helpy-helperton
Joined: Oct 2002
Posts: 3,584
Likes: 542
From: Phoenix, AZ
BAP Import Parts, $90 with core refund. Replaced 2 about 3-4 months ago and never looked back. Had a leaker that was from a cracked body that would squirt gasoline onto the top of the intake manifold - this made me VERY nervous, since if it overflowed there, it would run down to the exhaust system and start a fire.
The ones I received from BAP were marked 'Cobra' remanufacturing or something with a big snake, black box. Seem to work fine. Should replace in pairs to be sure that they're near the same flow rate. HTH,
The ones I received from BAP were marked 'Cobra' remanufacturing or something with a big snake, black box. Seem to work fine. Should replace in pairs to be sure that they're near the same flow rate. HTH,
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM
