Hello everyone 83 here with 13b ported runs 9.4 so far in the 1/8. I need traction i wheel hop and spin. IM running 13inch slicks. Anyone have any advice? How about an aftermarket temperature gauge, where can i install it????

 

put air bags inside the rear coils

 

*****

 

Air bags is a good idea. I put them in my Isuzu Amigo and with 35psi in each it has a rake and the rear end don't dive during acceleration.

 

$25 traction bars and you can paint them yellow. Because yellow = performance.

 

Ladder bars

 

air bags huh? where to get them and how much they run?

 

Which 13" slicks are you running? How tall are they?
First thing I would do is check the condition of the rear shocks.
I am running all stock rear suspension using 15" 22: tall et drags and they are working pretty decent for being so short. My best 60" so far hads been in the mid 1.6's with a 7.55 @ 92mph in the 1.8th.

Later
Randy

 

well damn evill! thats quick, i ran a 10 flat with in my gslse with just a weber. stock everything else. i would suggest nitto 555r drag radials, they are really grippy tires... for the street and strip.