HKS turbo manifold FITS! (Beware 56K)
#1
root
Thread Starter
Join Date: Mar 2001
Location: Phoenix, AZ
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
HKS turbo manifold FITS! (Beware 56K)
Ok for those of you who car. The HKS cast T04 manifold will fit on a 13BT in a 1st gen RX-7
Just thought some of you might be interested.
BTW here are some pics of my car
Space:
with plenty of room to spare:
Angle #2:
Further back:
1 more:
Garage:
Just thought some of you might be interested.
BTW here are some pics of my car
Space:
with plenty of room to spare:
Angle #2:
Further back:
1 more:
Garage:
#2
Well you got me beat! What turbo is that? Assuming the compressor is a 60-1 like what you were planing on getting? Did you always have the FD intake? Man I need to get a turbo, looks waaaaay to good in there.
Haltech in there yet?
Haltech in there yet?
#3
root
Thread Starter
Join Date: Mar 2001
Location: Phoenix, AZ
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
No, The turbo is actually my friends.. I just put it in so you guys could see.. Case you where looking for a turbo manifold still.. I have a T04E i am putting in with a crispeed manifold i am picking up second hand..
Yeah, i always had an FD intake for it.. So i got the Tranny and engine in.. They haltech is going in next..
-Zach
Yeah, i always had an FD intake for it.. So i got the Tranny and engine in.. They haltech is going in next..
-Zach
#4
What about Max?
Zach forgot to mention about the bad *** Nissan Maxima that he also technically owns. (His name ins on the title).
It has a new transmission, new windshield wipers, and last weekend the power steering fluid got topped off....
It has a new transmission, new windshield wipers, and last weekend the power steering fluid got topped off....
#5
I can has a Hemi? Yes...
iTrader: (2)
Nice!
Looks good in there. You should have asked the board if it would fit first, rather than having to try with a friend's Turbo. (but then there's no fun in trying right?)
I know for a fact it fits in there, as here is a car in Crispeed's shop with the same manifold.
By the way, make sure you put a heat shield on that puppy, as it does sit very close to the idler arm bushing.
Looks good in there. You should have asked the board if it would fit first, rather than having to try with a friend's Turbo. (but then there's no fun in trying right?)
I know for a fact it fits in there, as here is a car in Crispeed's shop with the same manifold.
By the way, make sure you put a heat shield on that puppy, as it does sit very close to the idler arm bushing.
Trending Topics
#9
I can has a Hemi? Yes...
iTrader: (2)
Originally posted by riffraff
damn i want me one of those
direckfreak: where can i find a manifold like that
damn i want me one of those
direckfreak: where can i find a manifold like that
PRICES
I believe the Rotary Engine ones are done by Crispeed, but don't quote me on that.
#11
root
Thread Starter
Join Date: Mar 2001
Location: Phoenix, AZ
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
Yep, the RX-7 store sells them. that is where the one i used was from.. But my turbo has an internal wastegate so i am using a custom SFP manifold..
-Zach
-Zach
#12
Full Member
Join Date: Mar 2001
Location: Sacramento, California
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Where in the world is that fascia found? Is that an FB? Looks really nice. I would like to see photos of the entire car! Not that I'll be turboing my any time soon!
Chris
Chris
#15
I can has a Hemi? Yes...
iTrader: (2)
Originally posted by RotoHead
Where in the world is that fascia found? Is that an FB? Looks really nice. I would like to see photos of the entire car! Not that I'll be turboing my any time soon!
Chris
Where in the world is that fascia found? Is that an FB? Looks really nice. I would like to see photos of the entire car! Not that I'll be turboing my any time soon!
Chris
More Pics in the Project Kramer Thread
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
Turblown
Vendor Classifieds
0
08-18-15 10:01 PM