HEEELLLLPPPP!! I am desprite!
#1
Senior Member
Thread Starter
Join Date: Jul 2001
Location: Muskegon, Mi
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
HEEELLLLPPPP!! I am desprite!
Ok here is the thing. I am installing a deck into a 81 rx7 and I have trimmed the dash to fit the cage, but it looks like there is a bracket that sticks down on the top corners behind the radio opening. I just dont know about the screws that hold the bracket in place that are in the way.
I wish I had a pic! I hope that someone out there has had to deal with this!!
Any other ideas for this install are more than welcome!
Thanks,
Josh
I wish I had a pic! I hope that someone out there has had to deal with this!!
Any other ideas for this install are more than welcome!
Thanks,
Josh
#5
Rotary Enthusiast
Yep, there are mounting points on each side for the dash trim. You need to grind these down, a fair bit to fit a DIN sized deck in there. That's why I went with the bottom location for my stereo (cause I'm a lazy SOB).
That doesn't mean you can't put it there, in fact it probably is better in the top because you'll have better access to it.
Good luck.
That doesn't mean you can't put it there, in fact it probably is better in the top because you'll have better access to it.
Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Rx7_Nut13B
South RX-7 Forum
6
07-04-05 12:43 PM
Rx7_Nut13B
3rd Generation Specific (1993-2002)
5
07-04-05 09:40 AM